XV-M52SL/XV-M50BK
1-18
Solder soldering
a
on the flexible board next to the
pickup unit.
From the bottom of the traverse mechanism unit,
disconnect the flexible wire from CN12 on the pickup
board.
1.
2.
Unsolder soldering
e
,
f
and
g
of each harness on the
pickup board.
Remove the screw
C
attaching the pickup board and
release the two joints
h
.
3.
4.
Removing the pickup board
(See Fig.1 and 6)
Solder soldering
a
on the flexible board next to the
pickup unit.
From the bottom of the traverse mechanism unit,
disconnect the flexible wire from CN12 on the pickup
board.
1.
2.
Unsolder soldering
e
of the motor harness on the
pickup board.
Remove the two screws
D
attaching the feed motor
assembly and remove the thrust spring. Move the
feed motor assembly in the direction of the arrow to
pull it out from the feed holder.
3.
4.
Removing the feed motor assembly
(See Fig.1, 6 and 7)
The laser diode of the pick-up might be destroyed by
static electricity, and solder with part a, please before
extracting a flexible wire from connector (CN12).
Moreover, please remove solder in part a after
inserting a flexible wire in connector (CN12).
Please refer to page 1-4 for a detailed content.
ATTENTION
The laser diode of the pick-up might be destroyed by
static electricity, and solder with part a, please before
extracting a flexible wire from connector (CN12).
Moreover, please remove solder in part a after
inserting a flexible wire in connector (CN12).
Please refer to page 1-4 for a detailed content.
ATTENTION
Fig.6
Fig.7
Pickup board
Feed motor assembly
Feed motor assembly
Thrust spring
Feed holder assembly
CN12
f
g
e
Joint h
Joint h
C
D
Fig.1
Pickup unit
Flexible board
a
D
Summary of Contents for XV-M50BK
Page 88: ...XV M52SL XV M50BK 2 17 ...
