VR-N100U
USERS
MANUAL
Page 36 of 98
All Items Are Subject To Change Without Notice
Feb. 2004 Rev 1.0
3.5.2. Camera Views (2, 4, 8, 16)
Each user may have their own preference in regards the simultaneous viewing of network cameras. Therefore, VR-N100U
allows the user to select from a 2 camera, 4 camera, 8 camera, or maximum 16 cameras to be displayed. If the maximum
number is not selected, you can switch between pages to see the other cameras. Below are a couple of screen shot examples
for the camera views (2 Cameras and 4 Cameras).
The frame surrounding each camera window may slightly vary because of the camera functionality (Fixed, PTZ, Motion, or
combo).
Camera Name
All cameras will display the associated name at the top. The default names will be assigned from
CameraA
to
CameraP
which represent discovered cameras 1 to 16.
Camera Recording Status
All cameras will have the current status on the lower-left corner (Continuous Recording
off
/
on
, Motion
C
ontrol
off/on-if supported). By clicking this button, you can toggle between the various supported recording modes. The
default setting will be
Off
on all cameras as the VR-N100U administrator will setup each camera accordingly.
The page will change and prompt you to allow you to reconfirm the change in recording status.
Auto Playback
All cameras will have the
Auto Playback
button located on the lower-right corner. By clicking this button, the
playback window will open up and automatically display the last minute of recorded video for that camera (if
available).