JVC TK-C685E, Instructions Manual

Page: 40 / 80

40
Changing camera settings from remote control
(
●
indicates the default value)
(
●
indicates the default value)
CAMERA FUNCTION1
screen (continued)
Item Setting value Functions and settings
D.ZOOM MAX
⳯
1
● ⳯
2
⳯
4
⳯
8
⳯
16
⳯
32
When the zoom lens is set to telephoto, optical zoom and electronic zoom will be
enabled. This item sets the maximum value of the electronic zoom function.
Memo :
●
As electronic zoom processes the images digitally, image quality will
deteriorate somewhat.
●
Increasing the electronic zoom ratio will shift the center of the screen toward
the top left. This is a characteristic of this camera and is not a malfunction.
●
The camera will not operate continuously from optical zoom to electronic
zoom. When the optical zoom is at TELE, press the telephoto button again.
STABILIZER
(TK-C686E/
TK-C686WPEonly)
●
OFF
ON
This function prevents image shaking caused by vibration. Set this function to
A
ON
B
to control image shaking.
Memo :
●
When the function is set to
A
ON
B
, the screen is enlarged to approximately 1.3
times.
●
Adjustment is disabled in the electronic zoom area.
●
Adjustment is disabled for about 1 minute after power ON and during Pan/Tilt/
Zoom operation.
●
Adjustment may not work due to fast cyclic screen shaking or the Pan/Tilt
angle of the camera head. Depending on the installation environment, the
camera may be subject to vibrations that may cause the stabilizer to
malfunction and an increase in unstable images. In such cases, set the
[STABILIZER] item to
A
OFF
B
before use.
LEVEL LOW
●
NORMAL
HIGH
This item allows you to set the adjustment level in 3 steps.
The adjustment volume is larger if the value is set to
A
HIGH
B
rather than
A
NORMAL
B
. When it is set to
A
LOW
B
, the adjustment volume is lesser than
compared to when it is set to
A
NORMAL
B
.
CAMERA FUNCTION2
screen
Item Setting value Functions and settings
FLIP OFF
AUTO
●
DIGITAL
When this item is set to
A
OFF
B
and the camera rotates vertically, the camera will
stop when it faces down.
3 steps are necessary when tracking objects that pass right under the camera:
A
Face the camera downward;
B
Rotate it horizontally at 180°;
C
Face the
camera upwards.
Using the Flip function allows you to reduce this step.
Set this item when shooting objects that pass right under the camera.
OFF
: Flip function does not activate.
AUTO : When the camera faces bottom, it rotates 180° horizontally and
stops.
DIGITAL : The top/bottom and left/right of the image flips when the object has
passed the bottom of the camera, at the position of 135°.
Memo :
●
When the item is set to
A
DIGITAL
B
and the tilt position is more than 90
⬚
,
A
MANUAL T90
B
will be displayed on the screen. When this item is set to
A
DIGITAL
B
but [MANUAL DISPLAY] item (
A
Page 38) is set to
A
OFF
B
,
A
MANUAL T90
B
will not be displayed.