5
Maintenance and operating environment
䢇
TK-C685E/TK-C686E is an indoor camera. It cannot be
used outdoors.
䢇
TK-C685E/TK-C686E is a pendant mount camera. Be
sure to install the product horizontally. The product will not
work properly if it is tilted.
䢇
TK-C685WPE/TK-C686WPE is for mounting to the wall.
Be sure to install the camera unit horizontally. The product
will not work properly if it is tilted.
䢇
Do not store in the following environments.
It might result in malfunctions or failure.
●
Hot or cold places beyond the allowable operating
temperature range
Allowable operating temperature:
-10
I
to 50
I
-40
I
to 50
I
●
Locations beyond the allowable operating humidity
range of 20 %RH to 90 %RH. (condensation is not
allowed)
●
Near equipment that produces strong magnetic fields,
such as transformers or motors.
●
Near equipment that emits radio waves, such as
transceivers and mobile phones.
●
Locations with excessive dust and sand.
●
Locations that are subject to vibration such as inside
the car or ship.
●
Locations prone to moisture such as window side.
●
Locations subject to steam or oil, such as kitchens.
●
Special environment, such as those with combustible
atmosphere
●
Locations that emit radiation, X-rays, salt attack or
corrosive gases.
●
Locations where medicine is used such as pool.
䢇
Use of this product and cables connected to this product
at locations where strong electric waves and magnetic
waves are generated (e.g., near radio, TV, transformer,
monitor, etc.) may cause noise interferences in the
images or changes in the color.
䢇
Inadequate heat ventilation may result in malfunction of
this product.
Be sure not to block vents around the product.
This product discharges heat from the surface of the main
unit.
䢇
Do not install it at locations directly subjected to cold air
such as near the vents of air-conditioners or at locations
with high temperature. Condensation may occur inside the
dome cover.
䢇
When using TK-C685WPE/TK-C686WPE in a low
temperature environment (-40
I
to 50
I
), video images
may not appear for as long as two hours until the internal
part is warmed up by the built-in heater. When using it in a
low temperature environment, therefore, it is
recommended that electric power be supplied at all times.
Transportation
䢇
Do not throw away the original box of the unit. Keep it and
use it for transporting the unit in future.
䢇
As the camera unit is of an easily rotatable structure,
secure the camera unit inside the dome cover such that it
does not rotate before transporting. Otherwise, an error
may occur during camera operation.
A
Face the heat release vents upward and secure the
lens section with tape.
B
Insert cushioning material wrapped with air caps
(approx. 50 mm x 200 mm) at two opposite sides of the
camera.
䢇
When mounting ceiling mount bracket to the camera unit
during transportation, let out the tip of fall prevention wire
so that it is not caught.If the fall prevention wire is caught
in the gap of ceiling mount bracket, the ceiling mount
bracket might not be able to detached from the camera
unit.(TK-C685E/TK-C686E)
Precautions
A
B
A
B
Cushioning material wrapped with air caps
Fasten with
Tape
Cushioning material wrapped with air caps
Fasten with
Tape
䡵
䡵
Let out the tip of fall prevention
wire
