JVC TK-C685E, Instructions Manual

Page: 9 / 80

9
䡵
Camera
I
Fixing holes (x3)
This hole is for mounting the ceiling mount bracket to the
ceiling or the ceiling recessed bracket (WB-S685U: Sold
separately).
J
Setting Switch
This switch allows you to configure settings such as protocol
and SYNC.
(
A
Page 19)
K
Machine ID Setting Switch
When the communication system is RS-485 multi DROP such
as the RM-P2580 system, a machine ID will be set for every
camera. (
A
Page 20)
L
Option Switch
Configure this switch when Pelco protocol is used.
(
A
Page 19)
M
Power lamp
The lamp lights up in green when AC24V power is turned on.
N
Camera connection terminal (female)
This connects to the connection terminal (male) of the
camera.
O
Fall Prevention Wire
This attaches to the fall prevention wire fixing bracket
F
of
the camera.
P
Front Mask
Q
Lens
Lens cannot be replaced.
R
Camera fixing lock knob (x2)
This knob secures the camera to the ceiling so that it does
not fall.
S
Cable cover
Remove the cover to pull the cables from the side of the
camera and mount the camera. (
A
Page 16)
T
Dome Cover
The dome cover is a delicate object. Handle it with care.
Note :
●
Do not peel off the protective sheet which is attached at
shipment, until the dome cover is mounted on the main
unit. (
A
Page 17)
R
O
Q
P
S
R
T