75
䡵
Setting
1
Place a white object at the center of the screen, under
the same lighting condition as the object to be shot
and zoom in to fill the screen with white.
2
Set [W.BALANCE] to
●
Shift up and down the [PAN/TILT] lever and move the
cursor (
Z
) to the [W.BALANCE] item.
●
Shift the [PAN/TILT] lever (left/right) to set to
●
appears on the screen.
3
Press the [SET] button (Start adjustment)
●
appears at the bottom left of the
screen when the Auto White Balance Adjustment
function is operating.
●
When the appropriate white balance is acquired,
is displayed.
䡵
Error Display
When auto white balance adjustment is not successful, the
following messages will be displayed.
Memo :
●
[W.BALANCE] will be displayed as
unavailable during B&W mode.
Message
Cause
Displayed when there is little white
color in the object or when color
temperature is not appropriate.
Shoot a white object to fill the
screen thoroughly and adjust the
white balance again.
Displayed when illumination is too
dark. Brighten the illumination and
perform procedures again to
achieve white balance.
Displayed when illumination is too
bright. Reduce the illumination
and perform procedures again to
achieve white balance.
<
MENU
>
RETURN
<
SET
>
AWC EXEC
POS.FUNCTION SET HOME
POSITION TITLE..
IRIS MODE AUTO
ExDR MODE OFF
ExDR LEVEL ---
BLC MODE OFF
W. BALANCE AWC
R GAIN 76
B GAIN 71
screen
