JVC TH-C40, Instructions Manual

Page: 66 / 94

15
7 To set the manufacturer’s code
1
Slide the remote control mode selector
to VCR/DBS.
2
Press DBS.
3
Press and hold
F
VCR/DBS.
Keep the button pressed until step 5 is finished.
4
Press ENTER.
5
Press number buttons (1-9, 0) to enter
the manufacturer’s code (2 digits).
Examples :
For a GI Jerrold product: Press 0 , then 1 .
For a Sony product: Press 2 , then 0 .
* “01” is the initial setting.
6
Release F VCR/DBS.
If there is more than one code listed for your brand, try each
one until you enter the correct one.
7 Operation
Aim the remote control at the DBS tuner or CATV converter.
IMPORTANT
Before using the remote control to
operate a DBS tuner or CATV converter;
1 Set the remote control mode selector
to VCR/DBS .
2 Press DBS .
The following buttons are available:
F VCR/DBS : Turns DBS tuner or CATV converter on and
off.
CH +/– : Changes the channels.
1-10, 0,
h
10 (100+) : Selects the channel.
7
To set the manufacturer’s code
1
Slide the remote control mode selector
to VCR/DBS.
2
Press VCR.
3
Press and hold F VCR/DBS.
Keep the button pressed until step 5 is finished.
4
Press ENTER.
5
Press number buttons (1-9, 0) to enter
the manufacturer’s code (2 digits).
Examples:
For a Philips VCR: Press
0 , then 9 .
For an NEC VCR: Press 2 , then 5 .
* “01” is the initial setting.
6
Release F VCR/DBS.
If there is more than one code listed for your brand, try each
one until you enter the correct one.
7 Operation
Aim the remote control at the VCR.
IMPORTANT
Before using the remote control to
operate a VCR;
1 Set the remote control mode selector
to VCR/DBS .
2 Press VCR .
The following buttons are available:
F VCR/DBS : Turns VCR on and off.
3 (play button): Starts playback.
7 : Stops operation.
8 : Pauses playback.
y : Fast forwards video tape.
1 : Rewinds video tape.
REC : Press this button together with 3 (play
button) to start recording or together with 8
to pause recording.
CH +/– : Changes the TV channels on the VCR.
NOTE
• When operating a VCR or DBS tuner/CATV converter;
– The source setting of VCR or DBS remains after you have changed
the remote control mode selector to AUDIO or TV . When operating
VCR or DBS tuner/CATV converter again, it is not necessary to
press
VCR or DBS after setting the remote control mode selector.
Operating the DBS tuner or
CATV converter
Manufacturer Code
Echostar 21
GI Jerrold 01 * , 02, 03, 04, 05, 06, 07, 08
Hamlin 15, 16, 17, 18
Pioneer 13, 14
RCA 19
Scientific Atlanta 09, 10
Sony 20
Zenith 11, 12
Operating the VCR
Manufacturer Code Manufacturer Code
JVC 01 * , 02, 03 Philips 09
Emerson 11, 26 RCA 05, 06
Fisher 29 Samsung 24
Funai 10, 14, 15, 16 Sanyo 21, 22, 23
Gold Star 12 Sharp 27, 28
Hitachi 04 Shintom 30
Mitsubishi 13 Sony 18, 19, 20
NEC 25 Zenith 08
Panasonic 07, 17
Operating external components with the remote control
See page 14 for button locations.
TH-C60-40[C]0.book Page 15 Wednesday, March 1, 2006 1:03 PM