19
• The icon such as
shows the disc formats or file types the
operation is available for.
IMPORTANT
Before using the remote control for the
following operation;
1 Set the remote control mode selector
to
AUDIO
.
2 Press
DVD
or
USB MEMORY
.
7
To play a disc
1
Press the desired DISC (1-5)
0
on the center unit.
• The system turns on and the disc tray comes
out.
2
Place a disc.
3
Press DISC (1-5), with SHIFT pressed.
NOTE
• Up to 5 discs can be loaded.
• You can also start playback by pressing the following buttons;
–
DVD
or
3
(play button) on the remote control
–
DISC(1-5)
3
or
3
on the center unit.
• The system plays back available discs sequentially until you stop
playback or until the disc loaded on the DISC 5 tray reaches to the
end. However, when DVD VIDEO is loaded in the system, playback
of the disc next to the DVD VIDEO will not start.
7
To play a file in a USB mass storage class device
Press USB MEMORY.
The operations of the files in a USB mass storage class device
depend on the file types stored in the device.
• For details on connecting a USB mass storage class device, see
“Connecting a USB mass storage class device”. (See page 13.)
7
When playing the following files...
• For MP3/WMA files
The file control display (see page 27) appears on the TV screen.
• For JPEG files
Each file (still pictures) is shown on the TV screen for about 3
seconds (slide-show). When stopping playback, the file control
display (see page 27) appears on the TV screen.
• For ASF/MPEG-2/MPEG-1 files
When stopping playback, the file control display (see page 27)
appears on the TV screen.
• For DivX files
During the readout time, “Reading Index...” may appear on the
TV screen. When stopping playback, the file control display (see
page 27) appears on the TV screen.
NOTE
• When several types of files are recorded on a disc/device, select
appropriate file type on the setup menu. (See page 34.)
• (For JPEG) The system cannot accept operations even though you
press any buttons before the entire picture appears on the TV screen.
7
To pause playback
Press
8
.
To continue playback, press
3
(play button).
7
To stop
Press
7
.
The buttons described below are used on pages 19 to 22.
Remote
control mode
selector
(play button)
Number
buttons
Cursor
(
3
/
2
)/
ENTER
Basic playback
When placing an 8 cm disc
Label side up
Playback
TH-C60-40[J]7.book Page 19 Monday, February 27, 2006 11:25 AM
