SW-D8000U, 16CH. COLOR VIDEO MULTIPLEXER
JVC PROFESSIONAL, IMAGING PRODUCTS 55
keystroke function. The FUNCTION button plus the macro number (1-16) will start the macro.
Pressing the FUNCTION button again can stop a macro.
Up to sixteen (16) macros, each having 32 keystrokes, can be programmed into the
SW-D8000U,
depending on the number of cameras on the model. The macro functions can be started
automatically at up to 20 preset times during the week by using the built-in macro scheduler. (See
MACRO TIMED START). To program MACROS select the MACROS menu item and this pull-down
sub-menu appears:
Macro Record
Macro Timed Start
Exit
MACRO RECORD
To initiate recording, select MACRO RECORD in the MACRO sub-menu, and select one of the
macros (1-32) on which to start recording. Upon selection, the system will automatically exit the
menus and go to a default screen. Subsequent keystrokes will be recorded into that macro.
NOTE:
An on-screen indicator,
‘F’
plus the macro number’, will appear and will stay on the
screen until recording of that macro is complete.
Each keystroke will be recorded, until either the FUNCTION key and ENTER
is
pressed to terminate recording, or until 32 keystrokes have been recorded.
Special keys functions during MACRO RECORD:
The following two-key combinations provide the programmer with special actions within macros.
FUNCTION
then
1
Activate output relay 1
FUNCTION
then
2
Reset output relay 1
FUNCTION
then
3
PAUSE macro, 1 second
FUNCTION
then
4
PAUSE macro, 5 seconds
FUNCTION
then
5
Activate output relay 2
FUNCTION
then
6
Reset output relay 2
FUNCTION
then
ENTER
end Macro recording
Recording new Menu Setups during MACRO RECORD:
If the programmer presses the MENU
key during macro recording, recording of
keystrokes is stopped. Instead of recording keystrokes while in the menus, the
programmer only records the final setting of each setup parameter for those sub-
menus, which are accessed by the programmer. Each time the MENU
key is pressed it
is counted as one keystroke in the MACRO.
Upon Playback of the macro, the unit will retrieve only those recorded menu setup parameters, and
will set the unit up accordingly. Parameters in sub-menus, which were not accessed during
recording of the macros, will not be recorded or retrieved during Playback of the macro. These new
menu setups can be activated manually or automatically by time and day (see MACRO TIMED
START) or on Alarm (see ALARM SETUP). Typical uses of this unique MACRO feature are;
q
Different Alarm Associated Alarm Display screens or Alarm Actions
q
Different sequence tables