SW-D8000U, 16CH. COLOR VIDEO MULTIPLEXER
JVC PROFESSIONAL, IMAGING PRODUCTS 53
An alarm history is kept in a cyclic buffer. History data, including camera number and time and date
is kept in memory for up to 100 events. The most recent 100 alarm events can be viewed on-
screen in the menus, by selecting the ALARMS menu and then selecting ALARM HISTORY.
A table will appear, allowing the programmer to browse forward and backwards among the last 100
alarmed events. Each event relates is recorded with the following information;
Alarm #, Date, Time and Relay #
The RS-232 remote control capability also allows an operator to upload the alarm history to a PC or
a similar controlling device.
LINK TO A MACRO
Any alarm input can be linked to any macro function. This can be used to start a pre-programmed
sequence of keystrokes each time an alarm occurs. Several alarm inputs can be linked to the
same macro function.
NOTE:
The system will always complete normal alarm action before executing the macro
function.
To link an alarm input to the macro function, use the LINK TO MACRO menu in the ALARMS sub-
menu.
FULLSCREEN ALARM
This option allows for setting the system to display only a FULLSCREEN image on Monitor-A
instead of the default multiscreen (or associated alarm camera displays) for any alarm input. See
section 4.9.
NOTE:
This is a
global
setting and will apply to ALL alarms.
RELAY CONFIGURATION
Each relay (1 & 2) can be configured for N/OPEN (normally open NO) or N/CLOSED (normally
closed NC). This menu item allows selection of either NC or NO configuration.
BUZZER SETUP
The internal buzzer is programmable to respond under various conditions. The sub-menu item
under ALARMS is as follows:
Buzzer Setup
Global Buzzer
:ON
Live Alarm Buzzer
:ON
Videoloss Buzzer
:ON
Playback Buzzer
:ON
[CANCEL] [OK]
q
q
Global Buzzer
– Set to OFF if some Buzzer responses are not to be active.