SW-D8000U, 16CH. COLOR VIDEO MULTIPLEXER
JVC PROFESSIONAL, IMAGING PRODUCTS 19
Press the
ENTER
key while displaying any multi-screen. The top left cameo will be the initial
active cameo.
The active cameo is indicated by flashing the camera number and its title.
To End Active Cameo mode:
The active cameo mode will stay active for about 15 seconds after the last key is pressed, or
until the
ENTER
key is pressed again to exit the mode. Active cameo mode will also stop
immediately if a new multi-screen display is selected, or if the operator switches between Live,
Play, and Record mode.
Key functions during ACTIVE CAMEO mode:
KEY
FUNCTION
Arrow keys
Moves the active cameo around the multi-screen.
Camera keys
Labeled
(
1
to
16
)
Selects a camera to display in the active cameo. The
active cameo will auto-advance to the next logical
cameo so the operator can easily enter cameras in
several cameos without using the arrow keys.
FREEZE
key
Freezes the cameo.
ZOOM
key
Switches to a full-screen display of that camera.
This
will cancel active cameo mode
.
Notice that if the
ZOOM
key is pressed with no active cameo selected, then the display will
switch full-screen to the camera displayed in the top left cameo.
NOTE:
Display formats are operating parameters, not menu selections, and so they are
saved in volatile memory and not in battery backed-up memory.
3.1.3
FULL-SCREEN DISPLAYS ON MONITOR-A
Fixed Full-screen display:
A full-screen display of any camera is selected on Monitor-A by pressing the
corresponding camera key.
Full-screen Sequence list:
There are independent sequences, which operate on Monitor-A and Monitor-B. Refer to the
AutoList™ feature below.
To start full screen sequencing on Monitor-A:
Select any full screen display by pressing the camera number, and then press the
SEQUENCE
key.
To stop full screen sequencing on Monitor-A: