JVC SR-VS30E Instructions Manual Download

Page: 24 / 92

Filename [SR-VS30E_1a-EN.fm]

Masterpage:Left

Page 24

February 1, 2002 3:34 pm

PLAYBACK/RECORDING ON VHS DECK (cont.)

Next Function Memory

The Next Function Memory “tells” the recorder what to do after
rewinding. Before continuing, make sure the recorder is in the
Stop mode.

For Automatic Start Of Playback
Press

, then press

within 2 seconds.

For Automatic Power Off
Press

, then press

within 2 seconds.

For Automatic Cassette Ejection After Tape Rewind
Press

, then press within 2 seconds.

NOTE:

The Automatic Power Off does not work if “AUTO TIMER” is set
to “ON” and if any timer programming has been made. If
“AUTO TIMER” is set to “ON”, the recorder directly goes into
the Timer-Standby mode at the same time when the

pressed for the Automatic Power Off.

Repeat Playback

Your recorder can automatically play back the whole tape 100
times repeatedly.

Start playback.

Press

Activate Repeat Playback.

Press

and hold for over 5 seconds, then release.

●

The Play indicator (

) on the front display panel blinks

slowly.

●

After playing back a tape 100 times, the recorder stops
automatically.

Stop Repeat Playback.

Press

at any time.

●

Pressing

also stops Repeat Playback.

SR-VS30E_1-EN.book Page 24 Friday, February 1, 2002 3:35 PM

Summary of Contents for SR-VS30E





























































































Search results

Summary of Contents for SR-VS30E

Reviews:

Related manuals for SR-VS30E

Brands by name

Popular brands

JVC SR-VS30E, Instructions Manual

Search results

Summary of Contents for SR-VS30E

Reviews:

Related manuals for SR-VS30E

Brands by name

Popular brands