JVC SR-VS30E, Instructions Manual

Page: 42 / 92

Filename [SR-VS30E_2-EN.fm]
Masterpage:Left
42
EN
Page 42 February 1, 2002 3:23 pm
TIMER RECORDING (cont.)
Check, cancel and change programmes
A
Disengage the timer mode.
Press
#
( TIMER ), then press
1
.
B
Access the Programme Check screen/display.
C
Access the Programme screen/display.
The front display panel shows the programme start time. Pressing
OK changes the display to the programme stop time, then the
date and the channel position.
To cancel or change a programme...
D
Cancel or change a programme.
Press
&
to cancel a programme. To change programme
settings, press the appropriate button: START+/– ,
STOP+/– , DATE+/– , PR+/– , VPS/PDC and/or SP/LP
(
p
).
●
You can change “TV PROG” to “SAT” for the channel position
by pressing the
number key “ 0 ”.
E
Return to the normal screen/display.
Press
"
as many times as necessary. If there are still
some programmes remaining, go to step 6 .
F
Return to the timer mode.
Press
#
( TIMER ).
NOTE:
You can also check the programmes on the front display panel
even if the recorder’s power is off (unless the recorder is in the
Power Save mode
墌
pg. 69) or the recorder is in the Timer
mode; however, it is not possible to cancel or change the
programmes.
Press
"
.
●
The Programme Check screen
or display appears for the deck
(VHS or DV) being selected.
1 2 3
4 5 6
7 8 9
1
2
1
2
3
0
3
4
4
Press
"
again to check
more information. Each time
you press
"
, the next
programme’s information
appears.
SR-VS30E_1-EN.book Page 42 Friday, February 1, 2002 3:35 PM