JVC SR-VS30E Instructions Manual Download Page 46

Page: 46 / 92

Filename [SR-VS30E_3-EN.fm]

Masterpage:Left

Page 46

February 1, 2002 3:27 pm

EDITING (cont.)

Normal Dubbing

(from DV to VHS)

NOTES:

●

If you set the dubbing direction incorrectly, you could erase an
important recording that you wanted to copy. It is
recommended to conduct a test with unimportant cassettes
first.

●

There may be a discrepancy of several seconds between
where you intend editing to start, and where it actually starts.

●

The superimposed indication during the operation or dubbing
is not recorded.

●

To cancel the dubbing mode, press

PR +/–

so that the dubbing

direction indicator (DV

) goes off.

●

When dubbing a Mini DV tape that was produced by audio
dubbing, you need to set “12BIT MODE” to the appropriate
mode before playing back the tape. (

墌

pg. 73)

You can dub selected scenes on a tape, starting and stopping
wherever you wish.

Load cassettes.

For the VHS deck

Insert a VHS (or S-VHS) cassette with the record safety
tab intact, or cover the hole using adhesive tape.

For the DV deck

Insert a Mini DV cassette with the erase protection switch
set to “SAVE”.

Select the dubbing direction.

Press .

●

The dubbing direction indicator (DV

) lights.

Set the tape speed.

Press

VHS

, then press

SP/LP (

)

●

“DV

]

VHS” appears on the TV screen if “O.S.D.” is set to

“ON”. (

墌

pg. 69)

Locate the start point on the DV deck.

Press

to start playback.

Press

to pause playback a little before the start

point.

Prepare the VHS deck for dubbing.

Press

VHS

Press and hold

and press

so that the VHS deck

enters the Record Pause mode.

●

DV playback indicator and VHS recording indicator light.

Start dubbing.

Press

START

Pause dubbing.

Press

START

●

The VHS deck enters the Recording Pause mode, then the DV
deck enters the Dubbing Pause mode.

End dubbing.

Press

to stop recording on the VHS deck. Then press

and press

to stop playback on the DV deck.

SR-VS30E_1-EN.book Page 46 Friday, February 1, 2002 3:35 PM

Summary of Contents for SR-VS30E





























































































Search results

Summary of Contents for SR-VS30E

Reviews:

Related manuals for SR-VS30E

Brands by name

Popular brands

JVC SR-VS30E, Instructions Manual

Search results

Summary of Contents for SR-VS30E

Reviews:

Related manuals for SR-VS30E

Brands by name

Popular brands