JVC SR-VS30E Instructions Manual Download Page 30

Page: 30 / 92

Filename [SR-VS30E_1a-EN.fm]

Masterpage:Left

Page 30

February 1, 2002 3:34 pm

PLAYBACK/RECORDING ON DV DECK

Basic Playback

(DV deck)

Load a cassette.

Make sure the window side is up, the rear label side is
facing you and the arrow on the front of the cassette is
pointed toward the recorder.

●

Do not apply too much pressure when inserting.

●

The recorder’s power comes on automatically.

●

If the erase protection switch is set to “SAVE”, playback begins
automatically. It takes about 15 seconds until the playback
picture appears.

●

Make sure the VCR indicator appears on the front display
panel. If not, press

TV/VCR

on the remote control to turn on

the VCR indicator.

Select the DV deck.

Press

●

The DV button lights on the recorder.

Find the programme start point.

If the tape is advanced past the start point, press

turn the

JOG

dial to the left. To go forward, press

turn the

JOG

dial to the right.

Start playback.

Press

●

The DV playback indicator lights on the recorder.

Stop playback.

Press

. Then press to remove the cassette.

●

The DV playback indicator turns off.

NOTE:

When you record a tape on the DV deck with the recording
speed set to “LP”, it is recommended to play back that tape back
on this DV deck. Digital video recorder from other
manufacturers may not be able to play back the tape properly.

Turn on the TV and select the AV mode.

Usable cassettes

Only cassettes marked

can be used with the DV

deck.

SR-VS30E_1-EN.book Page 30 Friday, February 1, 2002 3:35 PM

Summary of Contents for SR-VS30E





























































































Search results

Summary of Contents for SR-VS30E

Reviews:

Related manuals for SR-VS30E

Brands by name

Popular brands

JVC SR-VS30E, Instructions Manual

Search results

Summary of Contents for SR-VS30E

Reviews:

Related manuals for SR-VS30E

Brands by name

Popular brands