(E) 59
After transmitting the VISS SEARCH command (18), transmit the appropriate 2-byte numeric data (from 30H to 39H), the data input command
(40H), and either FF (ABH) or REW (ACH). All commands should be transmitted separately one byte at a time with “ACK” (0AH) confirmation
from the VCR after each transmission. * Execute in the Stop mode.
(18) VISS SEARCH (B3H)
: To search for a designated alarm-input point on the tape.
The VCR starts search after returning “ACK”. When the specified point is reached, the VCR returns COMPLETION (01H). If the end or
beginning of the tape is reached before the specified point, the VCR returns NOT TARGET (05H).
This command differs from commands (16) and (17) only in that the FF (ABH) or REW (ACH) command is included separately.
9 OPTIONAL SA-K97U RS-232C INTERFACE BOARD
TXD
7EH
30H
33H
RXD
0AH
0AH
0AH
Time
40H
0AH
2 VCR setting commands
Commands available include control of recording/playback mode setting, timelapse VCR operation mode setting, date and time setting, timer
programming, on-screen setting, and others.
5
Recording/playback mode setting commands
Two commands are available. One allows you to rotate through recording/playback modes, the other permits you to directly select the
mode.
(1)
MODE SHIFT (7DH) : Switches from one recording/playback mode to the next each time the command is transmitted. Use the TL
STATUS SENSE (D6H) command to check the current mode.
Transmit 1 byte at a time with “ACK” (0AH) confirmation from the VCR after each transmission.
(2)
MODE (7EH)
: Sets recording/playback mode directly.
After transmitting this command, transmit the appropriate 2-byte ASCII codes (from 30H to 39H) and the data
input command (40H). Correspondence of ASCII codes with recording/playback modes is as shown below.
Eg: To set to “L24H”.
Mode
1st byte
2nd byte
3H
30H
30H
L12H
30H
32H
L24H
30H
33H
48H
30H
34H
72H
30H
35H
120H
30H
37H
168H
30H
38H
240H
30H
39H
480H
31H
31H
960H
31H
33H
1st byte
2nd byte
BIT
When the bit is “1”
BIT
When the bit is “1”
0
Repeat recording function ON
0
Unused
1
Unused
1
Alarm recording function ON
2
POWER ON REC mode ON
2
Unused
3
Auto rewind ON
3
Sensor recording function ON
4
Unused
4
External recording function ON
5
Series recording function ON
5
Unused
6
Tape end buzzer ON during recording
6
Unused
7
Alarm recording buzzer ON
7
Warning buzzer ON
3rd byte
BIT
When the bit is “1”
0
Unused
1
Summer time compensation ON
2
Unused
3
Unused
4
Unused
5
Auto record check function ON
6
Unused
7
Unused
(1)
TL STATUS SET (86H)
: Set the timelapse VCR operation mode with 3-byte data. Send one byte at a time by checking
ACK (0AH) from the VCR.
• The setting details for the first to the third bytes are shown below.
TXD
86H
1st byte
0AH
0AH
Time
2nd byte
0AH
3rd byte
0AH
RXD
5
Timelapse VCR operation mode setting commands
E model
59 (E)
60
TXD
8EH
RXD
0AH
Time
31H
0AH
30H
0AH
33H
0AH
30H
0AH
39H
0AH
38H
0AH
5
Date and time setting commands
(1)
DATE SET (8EH)
: Set the current date (month, day, year) for the VCR. After this command (8EH) is sent, input 1-
byte numerical data (30H — 39H).
(Example) Oct., 30, 1998
(2)
TIME SET (8FH)
: Set the current time (hour, minute, second) for the VCR.
After this command (8FH) is sent, input 1-byte numerical data (30H — 39H).
(Example) 15 hours, 29 minutes, 59 seconds
Month
Day
Year
Minute
Second
Hour
5
Timer programming commands
(1)
PRG/CLK (62H)
: Engages timer programming mode.
(2)
SHIFT – (64H)
: Selects setting items. (–)
SHIFT + (63H)
: Selects setting items. (+)
(3)
SET – (66H)
: Sets data selected with SHIFT.
SET + (65H)
: Sets data selected with SHIFT.
(4)
CANCEL (67H)
: Cancels program data in timer programming or engages the Cancel Program mode.
Setting procedure is the same as when using the VCR controls. Be sure to transmit commands 1 byte at a time with “ACK” (0AH)
confirmation from the VCR after each transmission.
5
On-screen setting command
(1)
ON SCREEN ON (70H)
: Activates on-screen indication.
ON SCREEN OFF (71H)
: Deactivates on-screen indication.
Setting procedure for the following command (2) is the same as when using the VCR controls. Be sure to transmit commands 1 byte at a
time with “ACK” (0AH) confirmation from the VCR after each transmission.
(2)
ON SCREEN SELECT (74H): Switches the on-screen display items.
POS V+ (73H): Moves the on-screen indication in the vertical direction.
POS H+ (75H): Moves the on-screen indication in the horizontal direction.
5
Other commands
(1)
AL/PL RESET (E1H)
: When transmitted during alarm recording, the recording mode switches back to the previous mode.
The VCR’s “AL” indication goes off. Transmit again after “AL” indicator goes off to reset the alarm/
power loss memory.
(2)
COUNT RESET (E2H)
: Resets the tape counter to “0000”.
TXD
8FH
RXD
0AH
Time
31H
0AH
35H
0AH
32H
0AH
39H
0AH
35H
0AH
39H
0AH
9 OPTIONAL SA-K97U RS-232C INTERFACE BOARD
