25
4-7 Contents of Menu Switches
[ ]: Factory setting • The lower section in the items and set values columns shows what’s on the VCR’s display.
4 ON-SCREEN/MENU SWITCHES
Function
Screens
Items
Set values
CNT TAPE END [OFF]
500
1000
..
.
9500
OFF
500
..
.
9500
Outputs a tape end signal from the rear panel’s [TAPE END OUT] terminal
when the tape reaches the set tape reel counter value during recording.
During series recording, a series recording signal is output to a connected
VCR for continuous recording.
OFF: The counter end output function is disabled.
500 : A tape end signal is output when the set tape reel counter value is
reached during recording. A buzzer sounds when the menu switch
<END BUZ> on the <BUZZER/IN OUT> is set to “ON”.
For more information on the relationship between the tape reel
counter value and the tape remaining time, refer to page 64.
SR ET 2
..
.
9500
SR ET 3
ALARM/
REC MODE
[OFF]
SENSOR
ALARM
MODE
SENSOR
ALL
OFF
ALAR
SENS
ALL
Selects the alarm recording or sensor recording function.
• Alarm recording: When an alarm signal is input to the rear panel’s
[ALARM IN] terminal during recording, the mode switches to the 2H (SP)
or 6H (EP) : U model, 3H (SP) : E model recording mode for realtime
recording of the alarm event.
• Sensor recording: When an alarm signal is input to the rear panel’s
[ALARM IN] terminal in the Stop mode (Stop mode, Timer Recording
Standby or Operating Off mode), recording starts in the 2H (SP) or 6H
(EP) mode : U modeo, 3H (SP) mode : E model.
OFF:
Alarm or sensor recording is not executed.
ALARM:
Alarm recording is executed.
SENSOR: Sensor recording is executed.
ALL:
Both alarm and sensor recording are executed.
AL SE 1
(VCR's display)
SR ET 1
SRI/EXT
SRI/EXT REC
[OFF]
MODE
SERIES
EXT
OFF
SERI
EIT
Selects series recording or automatic recording with an external VCR activation
signal.
OFF:
The series recording and automatic recording with an external
signal functions are disabled.
SERIES: The series recording function is enabled.
EXT:
The automatic recording function with an external signal is enabled.
* When the menu switch <REPEAT REC> is set to “ON”, externally
activated recording is not executed.
EXT REC END
[NORMAL]
OPE OFF
NORn
POFF
Selects the mode engaged when externally activated automatic
recording ends.
NORMAL: The Stop mode is engaged.
OPE OFF: The Stop mode is engaged and the operating power mode
is turned off.
REC SPEED
[2H]
6H
2H
6H
Selects the recording mode for alarm or sensor recording.
2H: Records in the 2H (SP) mode.
6H: Records in the 6H (EP) mode.
AL SE 2
DURATION
5
10
15
30
60
120
[180]
TAPE END
MANUAL
5
..
.
180
TPEN
NANU
AL SE 3
Selects the recording duration for alarm or sensor recording.
5 — 180: Alarm or sensor recording is performed for the specified time (5
sec. to 180 sec.)
TAPE END: Alarm or sensor recording continues to the end of the tape.
MANUAL:
Alarm or sensor recording continues for as long as alarm
signals are input. Set to this position when specifying the
alarm recording time with a switcher.
*To ensure accurate alarm search and alarm scan operation,
be sure to set the recording time to 5 seconds or more.
nly
U model on
26
4-7 Contents of Menu Switches
4 ON-SCREEN/MENU SWITCHES
[ ]: Factory setting • The lower section in the items and set values columns shows what’s on the VCR’s display.
Screens
Items
Set values
Function
ALARM/
TAPE END
[OFF]
SENSOR
MODE
STOP
MODE
Selects whether or not the Stop mode is forcibly engaged when the tape
ends even if there is an alarm or sensor recording.
OFF: The forced Stop mode is not engaged.
• When the tape ends, the mode set with the menu switch <AUTO
REW> or <REPEAT REC> on the <VTR MODE> screen is engaged.
ON: The Forced Stop mode is engaged.
Sets whether or not the buzzer sounds when the tape ends in the
Record mode.
OFF: The buzzer does not sound.
ON: The buzzer sounds when the tape ends during recording. Also,
the buzzer sounds when the tape reel counter value set with the
menu switch <CNT TAPE END> on the SRI/EXT MODE screen
is reached.
When the mode is changed by pressing the [REW] button,
[EJECT] button or [OPERATE] button, the buzzer sound stops.
BUZZER
TAPE END
[OFF]
ON
OFF
ON
AL/SENSOR
[OFF]
IN
ON
OFF
ON
Selects whether or not the buzzer sounds during alarm or sensor
recording.
OFF: The buzzer does not sound.
ON: The buzzer sounds.
OFF
STOP
BU 22 1
RS-232C
B. RATE
600
1200
2400
4800
[9600]
600
..
.
9600
Selects the RS-232C data transfer rate (600 bps, 1200 bps, 2400 bps,
4800 bps and 9600 bps).
IN/OUT
CAMERA SW
[OFF]
1 FIELD
2 FIELD
OFF
1FRD
2FRD
Sets the camera switching signal output interval.
OFF:
No camera switching signal is output.
1 FIELD: Set to this position to switch cameras every 1 field.
2 FIELD: Set to this position to switch cameras every two fields (1
frame).
This screen is shown only when the optional SA-K97U RS-232C board is installed.
BU 22 2
WARNING
[OFF]
ON
OFF
ON
Sets whether or not the buzzer sounds when a warning occurs.
OFF: The buzzer does not sound.
ON: The buzzer sounds. When the warning is released, the buzzer
sound stops.
BU 22 3
iO
1
iO
3
(VCR's display)
AL SE 4
