51
SR-9080U
REC
EJECT
OPERATE
TIMER SEARCH
RESET/
CANCEL
DISPLAY LOCK
HDR
CNT RESET
MENU
TIME MODE
SHIFT
ON SCREEN
OPERATE
S E T
–
+
[VIDEO MODE]
1. V. PULSE OFF
[VTR MODE]
1. HDR OFF
2. CNT MEM SW ON
3. POWER ON REC OFF
4. AUTO REC CHECK OFF
5. AUTO REW OFF
6. REPEAT PLAY OFF
7. REPEAT REC OFF
7 PLAYBACK AND SPECIAL-EFFECTS PLAYBACK
7-5 Repeat Playback
The tape is automatically rewound and played back
repeatedly.
• To execute repeat playback, set <REPEAT PLAY> in
<VTR MODE> to “ON”.
Auto rewind
When the tape ends during recording, playback, or forward
search, the VCR automatically rewinds the tape to the start
and enters the Stop mode.
• To auto-rewind the tape, set the <AUTO REW> menu
switch in <VTR MODE> to “ON”.
[VIDEO MODE]
1. V. PULSE OFF
[VTR MODE]
1. HDR OFF
2. CNT MEM SW OFF
3. POWER ON REC OFF
4. AUTO REC CHECK OFF
5. AUTO REW ON
6. REPEAT PLAY OFF
7. REPEAT REC OFF
Set to “ON”.
Set to “OFF”.
[VIDEO MODE]
1. V. PULSE OFF
[VTR MODE]
1. HDR OFF
2. CNT MEM SW OFF
3. POWER ON REC OFF
4. AUTO REC CHECK OFF
5. AUTO REW OFF
6. REPEAT PLAY ON
7. REPEAT REC OFF
7-6 Counter Memory Function
VIDEO/VTR MODE
Set to “ON”.
[CNT RESET] button
[DISPLAY] button
When the counter memory function is ON, the VCR
automatically enters the Stop mode when the control tape
counter reaches “00:00:00” or when the reel tape counter
reaches “0000” in the FF or REW mode.
5
To activate the counter memory function, set <CNT
MEM SW> in <VTR MODE> to “ON”.
Operation
1
Select the counter display mode.
• Press the [DISPLAY] button on the front panel to set
the counter display mode to the control tape counter or
reel tape counter.
2
Press the [CNT RESET] button at the position
where you want to stop the tape.
[
The counter is set to “00
H
00
M
00
S
” or “0000”.
5
Execute recording or playback.
3
Engage the Stop mode and press the [FF] or [REW]
button.
[
When the counter reaches “
00
H
00
M
00
S
” or “0000”,
the Stop mode is automatically engaged.
Note:
• Repeat record/play, auto rewind and alarm search/
alarm scan/date and time search have priority over
the counter memory function.
VIDEO/VTR MODE screen
VIDEO/VTR MODE screen
Set to “ON”.
Note:
• When the <REPEAT PLAY> or <REPEAT REC>
menu switch is set to “ON”, the tape restarts playback
or recording after rewinding to the beginning.
52
SR-9080U
REC
REC
STOP
REC
CHECK
EJECT
OPERATE
REVERSE
FIELD REV
FIELD ADV
REW
PLAY
TRACKING
TIMER SEARCH
RESET/
CANCEL
DISPLAY LOCK
HDR
CNT RESET
MENU
TIME MODE
SHIFT
ON SCREEN
OPERATE
V. LOCK
PAUSE
FF
–
+
–
+
S E T
–
+
7 PLAYBACK AND SPECIAL-EFFECTS PLAYBACK
7-7 Tracking/V Lock Adjustment
When a picture moves up and down in the
Still mode and Timelapse Play mode
Press either the [V.LOCK+/–] button to minimize vertical
jitter.
When noise appears in the picture in the
Play/Field Advance mode
Tracking adjustment is possible in the following modes.
• 2H (SP), 6H (EP) : U model, 3H (SP) : E model and
timelapse play mode (except for L12H and L24H modes :
U model, L12H and L24H modes : E model)
• Field advance play
5
Press either the [TR/–] button until picture
noise is eliminated or minimized.
To return to the Tracking Preset mode, press the + and
– buttons simultaneously.
*The tracking adjustment is impossible in the L12H,
L24H Linear Slow play mode.
[V.LOCK +/–] buttons
[TR/–] buttons
When the picture is distorted, set the <V. PULSE> menu
switch in <VIDEO MODE> to “ON”.
This menu switch is effective only in the 2H and 6H modes
: U model, 3H mode : E model. Normally set to “OFF”.
7-8 V. PULSE
• When cameras synchronized with a power supply are
switched with a switcher, the pictures may be distorted at
the switching point. This switch locks the monitor to
prevent distortion of the displayed picture.
(Only operates in the Normal Play [2H/6H] mode : U
model, [3H] mode : E model)
• In the Still or Timelapse Play mode, V pulses are always
output.
[VIDEO MODE]
1. V. PULSE ON
[VTR MODE]
1. HDR OFF
2. CNT MEM SW OFF
3. POWER ON REC OFF
4. AUTO REC CHECK OFF
5. AUTO REW OFF
6. REPEAT PLAY OFF
7. REPEAT REC OFF
Set to “ON”.
VIDEO/VTR MODE screen
U model only ——
