66
Operating Other Manufacturers’ Equipment
Manufactures’ codes for STB
Manufacturer
Codes
JVC
56
*
, 57, 67
Amstrad
43 – 49
Blaupunkt
30
Echostar
50, 51, 67
General Insrument
29
Goldstar
31
Grundig
32, 33
Hemlin/Re
01 – 05
Hirschmann
48, 52 – 55
Instrument
68
Itt/Nokia
34
Jerrold/G
06 – 14
Kathrein
52, 58 – 63
NEC
35, 36
Oak
15 – 17
Orbitech
48
Panasonic
18 – 20
Philips
37, 38
Pioneer
21, 22
RCA
65
Samsung
39, 40
Schwaiger
61, 64
Scientiff
23 – 25
Siemens
41, 42
Sony
66
Technisat
48
Tocom
26
Zenith
27, 28
7
To change the transmittable signals for
operating other manufacturers’ STB
1. Press and hold
STANDBY/ON STB.
2. Press STB.
3. Enter the manufacturer’s code
using the number buttons (1–9,
0).
See the right to find the code.
4. Release
STANDBY/ON STB.
You can turn on and off the STB:
STANDBY/ON STB :
Turns on or off the STB.
After pressing STB, you can perform the following operations
on an STB:
TV/STB CH + or – :
Changes the channels.
1 – 9, 0, 100+
:
Selects the channels.
For channel number 5, press 5.
For channel number 10, press 1, then 0.
For channel number 23, press 2, then 3.
For channel number 135, press 100+, 3,
then 5.
TV RETURN will function as the
ENTER button if your equipment
requires pressing ENTER after selecting
a channel number.
Note:
• Refer also to the manual supplied with your STB.
5. Try to operate your STB by pressing
STANDBY/ON STB.
When your STB turns on or off, you have entered the correct
code.
If there are more than one code listed for your brand of STB,
try each one until the correct one is entered.
2
3
1
5
6
4
8
9
7
10/
0
+10
100+
EFFECT
TEST
SURR ON/OFF
SURR MODE
–
SUBWOOFER
+
CENTER
REAR·L
REAR·R
VCR
STB
TV
AUDIO
STANDBY/ON
VCR
STB
DVD
TV DIRECT
TAPE
TV
CDR
FM/AM
*“56” is the initial JVC code.
Note:
• Manufacturers’ codes are subject to change without notice. If
they are changed, this remote control cannot operate the
equipment.
EN63-72RX-DV5SL[B]2.pm5
02.8.6, 6:02 PM
66
