10
Now, you can plug the power cord of the unit into the AC outlet.
CAUTIONS:
• Do not touch the power cord with wet hands.
• Do not pull on the power cord to unplug the cord. When unplugging
the cord, always grasp the plug so as not to damage the cord.
Notes:
• Keep the power cord away from the connecting cords and the
antenna cables. The power cord may cause noise or screen
interference.
• The preset settings such as preset channels and sound adjustment
may be erased in a few days in the following cases:
– When you unplug the power cord.
– When a power failure occurs.
Getting Started
When the TV is equipped with the plural SCART terminals,
refer to the manual supplied with the TV to check the
available video signals for each terminal, then connect
SCART cable correctly.
For TV and video format
This unit cannot convert the video signals (S-video or
Composite). When the video signal of one video component
is different from that of the other (for example, one is
S-video, the other is Composite), you may not see the
pictures appropriately. In this case, unify the video signals of
all the video components into S-video or Composite, or you
need to switch the video signal of TV each time you change
the source.
• You can use T-V LINK function if you connect the T-V LINK
compatible TV and VCR to this unit with a fully wired
SCART cables. For details on T-V LINK, refer also to the
manuals supplied with the TV and the VCR.
• Connect SCART cable to EXT-2 terminal on your JVC's
T-V LINK compatible TV for T-V LINK function.
• Some TV, VCR, and STB support this type of data
communication. For complete details, refer also to the
manuals supplied with these equipments.
For T-V LINK
TV
VCR
STB (Set Top Box)
EN01_10RX-DV5SL[B]2.pm5
02.8.6, 6:01 PM
10
