17
Tuning into Stations Manually
On the front panel:
1
Press FM/AM to select the band.
The last received station of the selected band is
tuned in.
The CONTROL buttons now work for tuner
operations.
• Each time you press the button, the band alternates between
FM and AM.
2
Press CONTROL
∞
(or
5
)
repeatedly until “< TUNING >”
appears on the display.
3
While “< TUNING >” still remains
on the display, press repeatedly or
hold CONTROL
3
(or
2
) until you
find the frequency you want.
• Pressing (or holding) CONTROL
3
increases the frequencies.
• Pressing (or holding) CONTROL
2
decreases the frequencies.
From the remote control:
1
Press FM/AM.
“TUNER” appears on the
operation mode display.
2
Press repeatedly or hold TUNING
9
or
(
until you find the
frequency you want.
• Pressing (or holding) TUNING
9
increases the frequencies.
• Pressing (or holding) TUNING
(
decreases the frequencies.
Notes:
• When you hold and release CONTROL
3
(or TUNING
9
on the
remote control) or CONTROL
2
(or TUNING
(
on the remote
control), the frequency keeps changing until a certain station is
tuned in.
• When a station of sufficient signal strength is tuned in, the TUNED
indicator lights up on the display.
• When an FM stereo program is received, the STEREO indicator
also lights up.
Tuner Operations
FM/AM
E
CONTROL
CONTROL
ANALOG
VOLUME
SPK.
MHz
TUNED STEREO AUTO MUTING
L
R
Ex. : When selecting the FM band
ANALOG
VOLUME
SPK.
MHz
AUTO MUTING
L
R
ANALOG
VOLUME
SPK.
AUTO MUTING
L
R
ANALOG
VOLUME
SPK.
MHz
TUNED STEREO AUTO MUTING
L
R
Ex. : When selecting the FM band
MEMORY
ANALOG
VOLUME
SPK.
MHz
TUNED STEREO AUTO MUTING
L
R
CONTROL
ANALOG
VOLUME
SPK.
MHz
TUNED STEREO AUTO MUTING
L
R
Using Preset Tuning
Once a station is assigned to a channel number, the station can be
quickly tuned. You can preset up to 30 FM and 15 AM stations.
7
To store the preset stations
Before you start, remember...
There is a time limit in doing the following steps.
If the setting is canceled before you finish, start from step
2
again.
On the front panel ONLY:
1
Tune into the station you want to preset (see
“Tuning into Stations Manually”).
• If you want to store the FM reception mode for this station,
select the FM reception mode you want. See “Selecting the
FM Reception Mode” on page 18.
2
Press MEMORY.
The channel number position starts flashing on the
display for about 5 seconds.
3
Press CONTROL
3
(or
2
) to select
a channel number while the channel
number position is flashing.
4
Press MEMORY again while the selected
channel number is flashing on the
display.
The station is assigned to the selected channel
number.
• The selected channel number stops flashing and then the
frequency starts flashing.
5
Press CONTROL
3
(or
2
) to select another
frequency you want to store while the frequency
is flashing on the display.
6
Repeat steps
2
to
5
until you store all the
stations you want.
To erase a stored preset station
Storing a new station on a used channel number erases the
previously stored one.
MEMORY
ANALOG
VOLUME
SPK.
MHz
TUNED STEREO AUTO MUTING
L
R
EN15-22RX-DV5SL[B]2.pm5
02.8.6, 6:01 PM
17
