JVC IF-2D3D1, Instructions Manual

Page: 23 / 28

ii
Installation and c
onnec
tion/P
ar
ts identification
OUTPUT PRESET
button
ADJUST MODE button Arrow buttons
( )
Information display
FUNCTION button
SCOPE button
INPUT SELECT button
2D-3D button
POWER switch
EN
Parts identification
Front
POWER* Use it to turn on/off the power.
2D-3D* Press it to turn on/off the 2D-3D converter. (page 03)
INPUT SELECT* Press it to select an input terminal. (pages 03, 09, 13)
OUTPUT PRESET* Press it to select an output terminal and output type. (pages 03, 04, 09)
SCOPE* Press it to turn on/off the scope function. Setting items of the scope function are indicated on the
information display when the function is turned on. (pages 10, 11)
ADJUST MODE* Press it to turn on/off ADJUST MODE. Setting items of the functions of ADJUST MODE are indicated on the
information display when turned on. (pages 06, 12)
FUNCTION* Press it to use functions for camera adjustment (see page 11) and other functions (see pages 07, 13, 17).
(Arrow buttons)
(Up and down buttons)
Use them to select an item.
(Left and right buttons)
Use them to adjust a value.
Information display Indicates information such as menu items and their settings.
* Lights up while activated.
Rear
HD/SD SDI IN 1(L) terminal
(Audio and visual signals) HD/SD SDI IN 2(R) terminal
(Audio and visual signals) HDMI IN terminal
(Audio and visual signals)
RS-232C terminal
(to PC)
HD/SD SDI OUT 1(L) terminal
(Audio and visual signals) HD/SD SDI OUT 2(R) terminal
(Audio and visual signals)
HDMI OUT terminal
(Audio and visual signals)
Reclock out terminal
AC IN terminal
2D3D_EN.indb ii 2D3D_EN.indb ii 10.3.1 11:25:22 AM 10.3.1 11:25:22 AM