JVC IF-2D3D1, Instructions Manual

Page: 15 / 28

13
EN
Configuring the input settings
Frame synchronizer
You can synchronize the left and right input signals by locking the right input signal based on the
synchronizing signal of the left input.
1
Press FUNCTION and select FRAME SYNCHRO. using .
2
Select a setting value using .
●
The signals cannot be synchronized if the formats of the signals input to HD/SD SDI 1(L) and HD/SD SDI 2 (R) are different.
●
You cannot adjust frame synchronization on a timeline basis. If high-precision 3D images are required, turn off the function and
use generator lock on the cameras for frame synchronization.
LR inversion
You can switch the left and right of the input signals and output to the opposite channels.
1
Press INPUT SELECT repeatedly to select SDI-LR.
2
Select INVERT using .
Setting value Content
SDI-LR: NORMAL Normal output (no inversion of the left and right channel)
SDI-LR: INVERT
Outputting the signals from HD/SD SDI IN 1(L) through HD/SD SDI OUT 2(R), and those from HD/SD SDI IN 2(R)
through HD/SD SDI OUT 1(L).
LR mix
er
2D3D_EN.indb 13 2D3D_EN.indb 13 10.3.1 11:25:06 AM 10.3.1 11:25:06 AM