JVC IF-2D3D1, Instructions Manual

Page: 13 / 28

11
EN
Functions for camera adjustment –
Rotation
You can turn an input image upside-down. This is useful when you must
set a camera upside-down. The frames of the left and right images are
automatically synchronized when using this function.
Setting
1
Press FUNCTION and select ROTATE using .
2
Select a setting value using .
The three functions below are available as options of the scope function while it is activated.
Gain adjustment
You can adjust the gain of the waveform monitor/vectorscope.
1
Adjust the setting value using while displaying the waveform monitor or vectorscope. (-30 - 0 - +30)
Scope filter
Use it to activate a lowpass filter to limit the frequency band of the scope.
1
Press FUNCTION while using the scope function and select SCOPE FILTER using .
2
Select LOWPASS using .
Scope position
You can change the display position of waveform monitor/vectorscope.
1
Press FUNCTION while using the scope function and select SCOPE POSITION using .
2
Select a position using .
RIGHT LOWER
RIGHT UPPER LEFT UPPER
LEFT LOWER
LR mix
er
SDI 1(L) ROTATE (inversion of the left image)
SDI 2(R) ROTATE (inversion of the right image)
The image from HD/SD SDI IN 1(L) or HD/SD SDI IN
2(R) is inverted.
●
One-frame delay is required for image rotation.
The unit also delays the non-rotated image by
one frame in order to synchronize them.
One camera is set upside-
down.
OFF
Example camera setting
2D3D_EN.indb 11 2D3D_EN.indb 11 10.3.1 11:25:02 AM 10.3.1 11:25:02 AM