JVC HM-DSR100RU - Digital VCR And Satellite Dish Combo Instructions Manual Download Page 72

Page: 72 / 207

Page 4-26

User and
Installation Guide

3. Select the

Locks

option. If the system

prompts you for a password, it has already
been locked.

4. Select the

Lock System

option.

The recorder displays a message prompting
you to enter the system password.

Note:

If this option says "Unlock System"

instead, then the system has already been
locked.

5. Enter and verify a password, using the

number pad buttons. Write down the
password and put it in a safe place.
From this time on, you must enter this
password to unlock the system.

6. Select the

option. All the locks you

have created are now in effect.

NLOCKING

THE

YSTEM

After you do this procedure, all locks are turned off until you lock the system
again.

1. Press the

Mode

button until the remote is in

SAT mode.

2. Press the

Menu

button to open the

Main Menu

3. Select the

Locks

option.

Remote

Menu Options

Buttons

MODE

5 Locks

3 Lock System

* * * *

5 Locks

Summary of Contents for HM-DSR100RU - Digital VCR And Satellite Dish Combo
















































































































































































































Search results

Summary of Contents for HM-DSR100RU - Digital VCR And Satellite Dish Combo

Reviews:

Related manuals for HM-DSR100RU - Digital VCR And Satellite Dish Combo

Brands by name

Popular brands

JVC HM-DSR100RU - Digital VCR And Satellite Dish Combo, Instructions Manual

Search results

Summary of Contents for HM-DSR100RU - Digital VCR And Satellite Dish Combo

Reviews:

Related manuals for HM-DSR100RU - Digital VCR And Satellite Dish Combo

Brands by name

Popular brands