manualshive.com logo in svg

JVC HM-DSR100RU - Digital VCR And Satellite Dish Combo, Instructions Manual

The JVC HM-DSR100RU is a cutting-edge Digital VCR and Satellite Dish Combo that allows you to seamlessly access both satellite TV and digital recording capabilities. Get the most out of your device by downloading the comprehensive Instructions Manual for free from manualshive.com, ensuring a hassle-free and enjoyable user experience.

Share
Download
background image

Page 3-13

L

OCAL

 TV L

INK

The Local TV Link feature allows you to view your local broadcast or cable channels via
your system.  Once you get the channels set up, you can select and view those channels
through the 

Program Guide

, or the 

Browse Banner

;  that is, the same way as you would

any of the satellite channels.

The quality of the audio and video you receive on local broadcast channels
depends on the distance and terrain (hilly or flat) between the broadcast station
and where you live, and the placement and quality of the broadcast TV antenna
you use.  If you use cable channels, the audio and video quality of these
channels depends on your cable provider.  If you have any questions about
these channels, please contact your service provider, not the Service Center!

Due to variations in quality among broadcast and cable television providers,
the recorder manufacturer cannot be held responsible for the quality of these
services

Note:

  The 

Program Guide

 automatically displays “prime time” program information for the

ABC, CBS, and NBC networks.  “Prime time” hours vary in different areas.  The information
may be inaccurate if regularly-scheduled programs are preempted or if other changes occur.

This section explains how you can add your local channels (whether they are network
channels or cable channels) yourself, assign the network affiliations, and then access them
via the 

Program Guide

 and via other channel selection methods.

Y

OUR

 B

ROADCAST

 TV A

NTENNA

If you do not have a broadcast TV antenna installed, and wish to do so, there are a number
of options.  You can receive a limited number of channels via a “rabbit ears” type antenna
that sits on your TV set, or a much wider range via a large VHF/UHF indoor/outdoor an-
tenna.  Of course, the higher the quality of the broadcast TV antenna you use, the greater its
range and the better your reception will be.  Broadcast TV antennas are available from your
local consumer electronics retailers.

Make sure to follow the broadcast TV antenna installation instructions correctly.  Make sure to
ground the broadcast TV antenna properly!!  The antenna cable plugs into the 

VHF/UHF Ant.

In

 connection on the back panel of the recorder:

If your TV has an available Phono (RCA) Audio/Video input connections, connect them to
one of the recorder's 

Phono (RCA) Audio/Video outputs

. This will provide stereo audio

and a higher quality picture than the picture obtained when using the recorder's 

RF Out (RF

or VHF Connection)

.

Once you have attached your broadcast TV antenna or cable hook-up to this connection, you
can set up your Local TV Link channels.  The rest of this section explains how to do this.

Getting Started

Local TV Link

3

Summary of Contents for HM-DSR100RU - Digital VCR And Satellite Dish Combo
















































































































































































































Reviews:

No comments

Related manuals for HM-DSR100RU - Digital VCR And Satellite Dish Combo

RadioMaster Zorro Quick Start Manual preview
Zorro
Brand: RadioMaster Pages: 10
Jackson Labs Micro-JLT GNSS User Manual preview
Micro-JLT GNSS
Brand: Jackson Labs Pages: 83
l-com LCTP-10BT-10B5 Installation Manual preview
LCTP-10BT-10B5
Brand: l-com Pages: 6
X10 VK72A Owner'S Manual preview
VK72A
Brand: X10 Pages: 9
Dish Network Satellite Television User Manual preview
Satellite Television
Brand: Dish Network Pages: 134
Alpine CDA-9851 Owner'S Manual preview
CDA-9851
Brand: Alpine Pages: 36
XRadio DX-100 Series User Manual preview
DX-100 Series
Brand: XRadio Pages: 29
VDO CR 3200 Datasheet preview
CR 3200
Brand: VDO Pages: 2
Triax C-209CX User Manual preview
C-209CX
Brand: Triax Pages: 30
Sagem DVR 6200T User Manual preview
DVR 6200T
Brand: Sagem Pages: 52
Rotel RX-840 Owner'S Manual preview
RX-840
Brand: Rotel Pages: 27
EisSound 52691 Installation Manual preview
52691
Brand: EisSound Pages: 5
Onkyo HT-R330 Service Manual preview
HT-R330
Brand: Onkyo Pages: 99
Lumantek ASA-105 Reference And Installation Manual preview
ASA-105
Brand: Lumantek Pages: 16
Linx HP SERIES-II Design Manual preview
HP SERIES-II
Brand: Linx Pages: 24
Silicon Laboratories SI4830 Specification Sheet preview
SI4830
Brand: Silicon Laboratories Pages: 2
YOKOGAWA 720941 User Manual preview
720941
Brand: YOKOGAWA Pages: 2
TANDBERG TR 2055 Service Manual preview
TR 2055
Brand: TANDBERG Pages: 27

Brands by name

Popular brands

Load more brands