Page 3-14
User and
Installation Guide
A
DDING
L
OCAL
OR
C
ABLE
C
HANNELS
To add local broadcast or cable channels, do the following:
1. Press the
Mode
button until the remote
is in SAT mode.
2. Press the
Menu
button to open the
Main Menu
.
3. Select the
System Setup
option.
4. Select the
Installation
option.
5. Select the
Add Local Channel
option. If
you are setting up your local channels for
the first time or switching options in the
Select Cable/Broadcast
list, follow the
steps in order. Otherwise, go to step 8 to
add channels to the
Selected Local
Channels
list.
6. Press the
Left
arrow button to move the
highlight into the
Select Cable/
Broadcast
list.
7. Press the
Up
or
Down
arrow button to
highlight either the
Broadcast Channels
option or the appropriate
Cable Channels
option (Standard, HRC, or IRC)(Contact
your cable TV provider for information on
whether you have a standard, HRC or IRC
cable system. Press the
Select
button to
choose the channel option.
Note:
You can add either cable (Standard, HRC, or IRC) or broadcast channels,
not both. If you add one type of channel and then select another option, the
Selected
Local Channels
list will not change. In that case, the channels in the list would not
be correct for the option you selected. So, whenever you change the option, you
should also edit the
Selected Local Channels
list.
Remote
Menu Options
Buttons
T
H
E
M
E
6
2
MODE
MENU
1
6 System Setup
1 Installation
2 Add Local Chan.
Broadcast Channels
Standard Cable Channels
HRC Cable Channels
IRC Cable Channels
SELECT
