manualshive.com logo in svg

JVC HM-DSR100RU - Digital VCR And Satellite Dish Combo, Instructions Manual

The JVC HM-DSR100RU is a cutting-edge Digital VCR and Satellite Dish Combo that allows you to seamlessly access both satellite TV and digital recording capabilities. Get the most out of your device by downloading the comprehensive Instructions Manual for free from manualshive.com, ensuring a hassle-free and enjoyable user experience.

Share
Download
background image

Page 6-14

User and
Installation Guide

l

Place the satellite antenna as close to the recorder as possible.  Use no more than 100
feet of cable between the recorder and the satellite antenna, unless you install a line
amplifier to boost the signal.  Otherwise, the system is more likely to lose the signal
during periods of rain, snow, or heavy cloud cover.

l

Consider seasonal changes.  The site may appear unobstructed in the winter, but spring
and summer foliage could block the signal to the satellite antenna.

D

O

 N

OT’S

You should always follow these instructions to help ensure against injury
to yourself and damage to your equipment or mounting surface.  See
Important Product Safety Instructions on page ii for further safety instructions.

l

Never install the satellite antenna near power lines.

l

Do not install the satellite antenna where it can be jostled, bumped, or blocked by
people, animals, or vehicles.

l

Do not install the satellite antenna where it is exposed to high winds.  Do not try to
install the satellite antenna in windy or stormy weather, particularly if there is a chance
of lightning.

l

Do not attempt to fasten the satellite antenna to the mortar between bricks or cinder
blocks.

l

Do not mount the satellite antenna on vinyl or aluminum siding.  These materials are
structurally too weak to securely hold the satellite antenna, even with a building stud
underneath.  The siding would have to be crushed, or the forces of wind and weather
over time would crush the area under the foot of the antenna mast.

l

Do not mount the satellite antenna downwind of a chimney or furnace vent.   Ashes and
dirt could collect on the dish and LNBF, possibly causing damage and poor reception.  If
practical, locate the antenna so the dish faces away from the vent.

l

Do not install the satellite antenna on stucco or imitation masonry unless the base
material is solid.  Do not mount the satellite antenna on composite materials such as
strand, chip, fiber, or particle board unless the fastener attaches securely to a wall stud,
rafter, or other foundation material beneath the surface.

l

Do not mount the satellite antenna on a railing, on a tile roof, or in a tree.

Summary of Contents for HM-DSR100RU - Digital VCR And Satellite Dish Combo
















































































































































































































Reviews:

No comments

Related manuals for HM-DSR100RU - Digital VCR And Satellite Dish Combo

Naxa NCA-683 Instruction Manual preview
NCA-683
Brand: Naxa Pages: 8
Jensen VM9411 Instruction Manual preview
VM9411
Brand: Jensen Pages: 110
FUTABA R303FHS Instructions preview
R303FHS
Brand: FUTABA Pages: 1
Grecom EZ Scan-SD PSR-700 Owner'S Manual preview
EZ Scan-SD PSR-700
Brand: Grecom Pages: 69
Spotwave Spotcell 167 For Private Trunked Radio Www.Spotwave.Com Quick Installation Manual preview
Spotcell 167
Brand: Spotwave Pages: 2
Dual XDMA6540 Installation & Owner'S Manual preview
XDMA6540
Brand: Dual Pages: 38
Onkyo TX-SA876 Service Manual preview
TX-SA876
Brand: Onkyo Pages: 285
Audiovox 1286634 Owner'S Manual And Installation Manual preview
1286634
Brand: Audiovox Pages: 16
Aiwa NSX-SZ2 LH Service Manual preview
NSX-SZ2 LH
Brand: Aiwa Pages: 41
PCB Piezotronics 003C10 Installation And Operating Manual preview
003C10
Brand: PCB Piezotronics Pages: 6
Sound Storm SD877BI User Manual preview
SD877BI
Brand: Sound Storm Pages: 19
AMG AMG2648R Instruction Manual preview
AMG2648R
Brand: AMG Pages: 6
Yaesu FT-2400H-2 - SERVICE Service Manual preview
FT-2400H-2 - SERVICE
Brand: Yaesu Pages: 14
ATON In-Wall IR Receiver AIR6 Product Manual preview
In-Wall IR Receiver AIR6
Brand: ATON Pages: 2
Dolby Laboratories Accessibility Solution Reference Manual preview
Accessibility Solution
Brand: Dolby Laboratories Pages: 2
Lafayette COMSTAT 35 Installation And Operating Instrictions preview
COMSTAT 35
Brand: Lafayette Pages: 26
Lancia Ypsilon User Manual preview
Ypsilon
Brand: Lancia Pages: 29
Panasonic CQ-DFX501 Operating Instructions Manual preview
CQ-DFX501
Brand: Panasonic Pages: 17

Brands by name

Popular brands

Load more brands