manualshive.com logo in svg

JVC HM-DSR100RU - Digital VCR And Satellite Dish Combo, Instructions Manual

The JVC HM-DSR100RU is a cutting-edge Digital VCR and Satellite Dish Combo that allows you to seamlessly access both satellite TV and digital recording capabilities. Get the most out of your device by downloading the comprehensive Instructions Manual for free from manualshive.com, ensuring a hassle-free and enjoyable user experience.

Share
Download
background image

Page 6-8

User and
Installation Guide

l

Compass

l

Silicone sealant

Tools, such as drills or screwdrivers, are not included in the Installation Kit.

I

NSTALLING

 B

ATTERIES IN THE

 R

EMOTE

Four AAA batteries, packaged separately, are included with the remote control.  See Installing
Batteries in the Remote on page 3-1 for this procedure.

S

ETTING THE

 R

EMOTE

 A

DDRESS

When you get your recorder and remote, they are addressed to 1. Unless you experience
problems, you do not need to change the address at this time.   If you want to change the
address, change it to a different number.

You may need to set the remote address in any of the following situations:

l

You have a UHF remote, and you encounter interference caused by other nearby UHF
remotes (for example, a neighbor's UHF remote or a UHF remote being used in another
room of your building).

l

There is another satellite receiver and remote being used in the vicinity.

Note:

  In either of the above situations, you may need to assign an address to your

remote and recorder, so that the recorder responds only to that remote.

l

Your recorder does not respond to the remote.  You must match the addresses to be able
to use the remote.  In this case, it could be that the remote and recorder are set to differ-
ent addresses.  See Setting the Remote Address on page 3-2 for this procedure.

T

EMPORARILY

 C

ONNECTING THE

 R

ECORDER TO

 TV

You must connect the recorder to your TV and make sure the Smart Card is installed to get
the information to aim your satellite antenna.  In this step, it is not necessary to fully wire
your recorder to all your electronic equipment.

See Wiring Setups on page 7-21 for suggested wiring configurations.  The Quick Install on
page 7-22 is the quickest and easiest to set up.

Summary of Contents for HM-DSR100RU - Digital VCR And Satellite Dish Combo
















































































































































































































Reviews:

No comments

Related manuals for HM-DSR100RU - Digital VCR And Satellite Dish Combo

Nauticam N120 Instruction Manual preview
N120
Brand: Nauticam Pages: 6
Alinco EC10 s Specifications preview
EC10 s
Brand: Alinco Pages: 4
Tecsun PL - 118 Operation Manuals preview
PL - 118
Brand: Tecsun Pages: 1
Foxcom Sat-Light 7410F Installation And User Manual preview
Sat-Light 7410F
Brand: Foxcom Pages: 74
ZoneVu ZVR-510 User Manual preview
ZVR-510
Brand: ZoneVu Pages: 27
Elsema GLR2703 Quick Start Manual preview
GLR2703
Brand: Elsema Pages: 9
Sam ADCL-200 Technical Notice preview
ADCL-200
Brand: Sam Pages: 20
GbSat 2CI0 User Manual preview
2CI0
Brand: GbSat Pages: 52
Magnavox CED1600 User Manual preview
CED1600
Brand: Magnavox Pages: 31
uAvionix pingStation3 User And Installation Manual preview
pingStation3
Brand: uAvionix Pages: 31
ZyXEL Communications SFP10G-LR User Manual preview
SFP10G-LR
Brand: ZyXEL Communications Pages: 1
Boss Audio Systems 748UAI User Manual preview
748UAI
Brand: Boss Audio Systems Pages: 11
CallingSYS ZJ-82 User Manual preview
ZJ-82
Brand: CallingSYS Pages: 8
FrSky ARCHER SR8 PRO Instruction Manual preview
ARCHER SR8 PRO
Brand: FrSky Pages: 3
Jensen MP6612i Installation And Operation Manual preview
MP6612i
Brand: Jensen Pages: 36
EA3GCY My First Transceiver MFT-40 Assembly Manual preview
My First Transceiver MFT-40
Brand: EA3GCY Pages: 29
Cobra AirWave CWA BT150 Quick Start Manual preview
AirWave CWA BT150
Brand: Cobra Pages: 2
Alpine 3DE-7985E Owner'S Manual preview
3DE-7985E
Brand: Alpine Pages: 44

Brands by name

Popular brands

Load more brands