Page 5-33
E
DITING
TO
OR
FROM
A
NOTHER
VCR
You can use the recorder as the playback unit or the recording unit to edit from VHS to VHS.
It is also possible to use the recorder as the playback unit to edit from D-VHS to VHS. It is
not possible to edit from D-VHS to D-VHS by connecting to an external D-VHS recorder.
To make an edited VHS tape, do the following:
VCR Features
Editing to or from Another VCR
5
1. Connect the playback unit's VIDEO OUT
and AUDIO OUT connectors to the
recording unit's VIDEO IN and AUDIO IN
connectors using the supplied Audio/Video
cable.
l
If using another VCR with an S-VIDEO
input connector, it is recommended to use
the S-VIDEO connection to minimize
picture degradation while editing.
l
When using the recorder as the recording
unit and a monaural VCR as the playback
unit, connect the VCR's AUDIO OUT
connector to the AUDIO IN L connector
on the recorder.
2. Load the cassette to be played into the
playback unit, and load the cassette to be
recorded into the recording unit.
3. Set the recording unit's input mode to
AUX.
l
With this recorder, press the number
button "000". "AUX" will appear in the
on-screen display instead of a channel
number.
l
Select the SP or EP tape speed
(see page 5-5).
4. Start tape playback on the playback unit.
l
If you do not want superimposed
on-screen characters and symbols from
the playback unit to be recorded onto
the edited tape, turn its superimpose
function off (if allowed by the playback
unit).
5. Start recording on the recording unit.
Remote
Menu Options
Buttons
1
2
3
4
5
6
7
8
0
9
