JVC GZ-RX110 Detailed User Manual Download

Page: 155 / 164

Playback

Sound or video is interrupted.

Sometimes playback is interrupted at the connecting section between two

scenes. This is not a malfunction.

There is no sound.

When the Silent mode is used, operation sounds will not be output. Turn off

the Silent mode.

“Using the Silent Mode” (

p. 24)

Set “OPERATION SOUND” in the “SETUP” menu to “ON”.

“ OPERATION SOUND ” (

p. 142)

Audio sound is not recorded for videos taken in TIME-LAPSE RECORDING.

“Recording at Intervals (TIME-LAPSE RECORDING)” (

p. 43)

The same image is displayed for a long time.

Use a high speed SD card (Class 4 or higher).

“Types of Usable SD Card” (

p. 11)

Clean the terminals of the SD card with a dry cotton swab or something

similar.

Execute “FORMAT SD CARD” in the “MEDIA SETTINGS” menu. (All data

will be deleted.)

“ FORMAT SD CARD ” (

p. 144)

The motion is choppy.

Use a high speed SD card (Class 4 or higher).

“Types of Usable SD Card” (

p. 11)

Clean the terminals of the SD card with a dry cotton swab or something

similar.

Execute “FORMAT SD CARD” in the “MEDIA SETTINGS” menu. (All data

will be deleted.)

“ FORMAT SD CARD ” (

p. 144)

Verify the system requirements of your PC when using Everio MediaBrowser

4 to play back.

“Verifying System Requirements (Guideline)” (

p. 71)

Cannot find a recorded file.

Change the playback media by tapping

on the touch screen.

“Operation Buttons for Video Playback” (

p. 49)

“Operation Buttons for Still Image Playback” (

p. 55)

Select “PLAYBACK OTHER FILE” in the menu. (Video files that have

damaged management information can be played back.)

“ PLAYBACK OTHER FILE ” (

p. 54)

Images do not appear on the TV properly.

Disconnect the cable and connect again.

“Connecting via the HDMI Mini Connector” (

p. 57)

Reset this unit.

“Resetting this Unit” (

p. 152)

Images are projected vertically on the TV.

Set “VIDEO OUTPUT” in the “MEDIA SETTINGS” menu to “4:3”.

“ VIDEO OUTPUT ” (

p. 143)

Adjust the TV's screen accordingly.

The image displayed on TV is too small.

Set “VIDEO OUTPUT” in the “MEDIA SETTINGS” menu to “16:9”.

“ VIDEO OUTPUT ” (

p. 143)

When connected to the TV via the HDMI mini cable, proper

images and sounds are not output.

Images and sounds may not be output properly depending on the TV

connected. In such cases, perform the following operations.

Disconnect the HDMI mini cable and connect it again.

“Connecting via the HDMI Mini Connector” (

p. 57)

Editing/Copying

Unable to delete file.

Files (videos/still images) that are protected cannot be deleted. Release

protection before deleting the file.

“Protecting Files” (

p. 61)

Unable to copy to SD card.

If the SD card is write protected, set it to off.

Troubleshooting

155

Summary of Contents for GZ-RX110





































































































































































Search results

Summary of Contents for GZ-RX110

Reviews:

Related manuals for GZ-RX110

Brands by name

Popular brands

JVC GZ-RX110, Detailed User Manual

Search results

Summary of Contents for GZ-RX110

Reviews:

Related manuals for GZ-RX110

Brands by name

Popular brands