JVC GZ-RX110 Detailed User Manual Download

Page: 31 / 164

Setting Backlight Compensation

You can correct the image when the subject appears too dark due to

backlight.

Select the Manual recording mode.

If the mode is

Intelligent Auto, tap

on the recording screen

to display the mode switching screen.

Tap

to switch the recording mode to Manual.

Tap “MENU”.

The top menu appears.

Tap “RECORD SETTING”.

Tap “BACKLIGHT COMP.”.

Tap

to exit the menu.

Tap

to return to the previous screen.

Tap “ON” or “ADVANCE”.

“ADVANCE” is designed to perform more effective backlight

compensation. Choose this when the backlight compensation is not

adjusted appropriately by “ON”.

After setting, the

icon (Advance:

) appears.

Setting

Details

OFF

Backlight compensation is disabled.

Backlight compensation is enabled.

ADVANCE

Should be selected for a better backlight

compensation effect.

Recording

Summary of Contents for GZ-RX110





































































































































































Search results

Summary of Contents for GZ-RX110

Reviews:

Related manuals for GZ-RX110

Brands by name

Popular brands

JVC GZ-RX110, Detailed User Manual

Search results

Summary of Contents for GZ-RX110

Reviews:

Related manuals for GZ-RX110

Brands by name

Popular brands