JVC GZ-RX110 Detailed User Manual Download

Page: 61 / 164

Tap “SET”.

If no file is selected, the “SET” button cannot be pressed.

Tap “EXECUTE” to confirm the deletion.

After deleting is complete, tap “OK”.

To cancel the deletion, tap “QUIT”.

Protecting Files

Prevent important videos/still images from being deleted accidently by

protecting them.

“Protecting/Releasing Protection of the Currently Displayed File”

(

p. 61)

“Protecting/Releasing Protection of Selected Files” (

p. 62)

Caution :

When the recording media is formatted, even the protected files will be

deleted.

Protecting/Releasing Protection of the Currently Displayed

File

Protects or releases protection of the currently displayed file.

Tap “MENU”.

While the video mode is shown in the image, the same operations

apply for the still image mode.

Tap “EDIT”.

Tap “PROTECT/CANCEL”.

Tap “YES”.

Tap

to select the previous or next file.

After setting, tap “OK”.

Editing

Summary of Contents for GZ-RX110





































































































































































Search results

Summary of Contents for GZ-RX110

Reviews:

Related manuals for GZ-RX110

Brands by name

Popular brands

JVC GZ-RX110, Detailed User Manual

Search results

Summary of Contents for GZ-RX110

Reviews:

Related manuals for GZ-RX110

Brands by name

Popular brands