1-3
Fig. 1.2 (4)
Fig. 1.2 (3)
(5) Remove the five screws
3
3 and
4
, then remove the opti-
cal block assembly carefully not to damage boards and ca-
bles.
4
3
Fig. 1.3.1(2)
Fig. 1.3.1(1)
(3) Lift up the mechanism unit gently and disconnect the
cablesCN75, CN16 and CN17.
1.3
HOW TO REMOVE VCR UNIT
1.3.1
Mechanism unit
(1) Remove the left side cover. (see section 1.1.1)
(2) Remove the four screws
1
.
1
1
CN16
CN75
CN17
Note :
•
The CCDs are bonded precisely to the prism. In case of
trouble with a CCD, it is not possible to replace an indi-
vidual CCD, but the entire optical block assembly should
be replaced.
•
The optical block assembly supplied as a service part.
•
When replacing the optical block, attach the original FAN
and FNC board to the new optical block because those
are not included on the optical block assembly.