1-6
1.4.4
MAIN board
(1) Remove MIF board. (see section 1.4.3)
(2) Remove six screws
6
and
7
.
(3) Remove the cables CN3, CN16, CN17, CN18, CN19, CN26,
CN27, CN28, CN29 and CN30.
Fig. 1.4.4(3)
1.4.5
HANDLE assembly
(1) Remove left side cover and right side cover. (see section
1.1.1 and 1.1.2)
(2) Remove two screws
9
.
Fig. 1.4.5(1)
Fig. 1.4.3
1.4.3
MIF board
(1) Remove the right side cover. (see section 1.1.2)
(2) Remove four screws
5
.
(3) Remove the cables CN4, CN9, CN11, CN12, CN13, CN22,
CN23, 34 and CN48, then lift up MIF board to release B to B
connector between MIF board and MAIN board.
Fig. 1.4.4(1)
5
5
CN12
CN13
CN23
CN9
CN4
CN34
CN11
CN22
CN48
6
CN17
CN18
CN3 CN16
CN19
CN30
7
CN26
CN28
CN27
CN29
(5) Remove the two screws
8
. Remove the heat sink carefully
because it is being fitted sticky.
Do not bend the Heat Pipe.
9
Fig. 1.4.4(2)
8
(4) Slide the MAIN board downward and pull out.
Do not bend the Heat Pipe.
