EN
17
MasterPage: Advan_Heading0_Right
Time Code
During recording, a time code is recorded on the tape.
This code is to confirm the location of the recorded scene
on the tape during playback.
* Frames are not displayed during recording.
If recording starts from a blank portion, the time code
begins counting from “00:00:00” (minute:second:frame).
If recording starts from the end of a previously recorded
scene, the time code continues from the last time code
number.
To perform Random Assemble Editing (
time code is necessary. If during recording a blank
portion is left partway through the tape, the time code is
interrupted. When recording is resumed, the time code
starts counting up again from “00:00:00”. This means the
camcorder may record the same time codes as those
existing in a previously recorded scene. To prevent this,
perform “Recording From The Middle Of A Tape” (see
below) in the following cases;
●
When shooting again after playing back a recorded tape.
●
When power shuts off during shooting.
●
When a tape is removed and re-inserted during shooting.
●
When shooting using a partially recorded tape.
●
When shooting on a blank portion located partway through
the tape.
●
When shooting again after shooting a scene then opening/
closing the cassette holder cover.
NOTES:
●
The time code cannot be reset.
●
During fast-forwarding and rewinding, the time code
indication does not move smoothly.
●
The time code is displayed only when “TIME CODE” is set
to “ON”. (
Recording From The Middle Of A Tape
1)
Play back a tape or use Blank Search (
find the spot at which you want to start recording, then
engage the Still Playback mode. (
2)
Set the Power Switch to “
A
” or “
M
” while pressing
down the Lock Button located on the switch, then start
recording.
12 : 34 : 24
Minutes
Seconds
Frames*
(25 frames = 1 second)
Display
VIDEO PLAYBACK
1
Load a cassette. (
2
Set the
VIDEO/MEMORY
Switch to “VIDEO”.
(GR-DX97/77/67only)
3
Set the Power Switch to “PLAY” while pressing down
the Lock Button located on the switch.
4
To start playback, press
4
/
9
.
5
To stop playback, press
8
.
●
During Stop mode, press
3
to rewind, or
5
to fast-
forward the tape.
To control the speaker volume
Press
VOL. +
to turn up the volume, or
VOL. –
to turn
down the volume.
NOTES:
●
The playback picture can be viewed in the LCD monitor,
viewfinder or on a connected TV. (
●
If Stop mode continues for 5 minutes when power is
supplied from a battery, the camcorder shuts off
automatically. To turn on again, set the Power Switch to
“OFF”, then to “PLAY”.
●
When a cable is connected to the AV connector, the sound
is not heard from the speaker.
Still Playback
Pauses during video playback.
1)
Press
4
/
9
during playback.
2)
To resume normal playback, press
4
/
9
again.
●
If still playback continues for more than about 3 minutes,
the camcorder’s Stop mode is automatically engaged.
Normal Playback
Speaker
4
/
9
Lock Button
3
VIDEO/MEMORY
(GR-DX97/77/
67only)
Power Switch
8
MENU
5
VOL. +/-
GR-DX97PAL.book Page 17 Tuesday, January 6, 2004 12:44 PM
