JVC GR-DX67EK, Service Manual

Page: 102 / 124

MENUS FOR DETAILED ADJUSTMENT
30
EN
MasterPage: Left
[OFF] : Time code is not displayed.
ON : Time code is displayed on the camcorder and on the
connected TV. Frame numbers are not displayed during
recording. (
墌
pg. 17)
OFF : Auxiliary microphone level indicator does not
appear.
[ON] : Displays auxiliary microphone level indicator when
optional microphone is connected. (
墌
pg. 7)
墌
pg. 12, “Date/Time Settings”
DSC (GR-DX97/77/67 only)
[ ] = Factory-preset
[FINE] / STANDARD
The Picture Quality mode can be selected to best match
your needs. Two Picture Quality modes are available:
FINE (
) and STANDARD ( ) (in order of quality).
NOTE:
The number of storable images depends on the selected
picture quality as well as the composition of the subjects in
the images and the type of memory card being used.
(
墌
pg. 21)
640 x 480 / [1024 x 768]
The Image Size mode can be selected to best match
your needs. (
墌
pg. 21)
NOTE:
The setting can be changed only when the VIDEO/MEMORY
Switch is set to “MEMORY”.
[ (TAPE)] : When Snapshot recording is performed
with the VIDEO/MEMORY Switch set to “VIDEO”, still
images are recorded only onto the tape.
/ (TAPE/CARD) : When Snapshot recording is
performed with the VIDEO/MEMORY Switch set to
“VIDEO”, still images are recorded not only onto the tape
but also in the memory card (640 x 480 pixels). In this
mode, the “SNAP MODE” selection in CAMERA Menu is
also applicable to memory card recording.
[OFF] : Disables the function.
ON : Enables interval shooting. (
墌
pg. 21)
15SEC / 30SEC / [1MIN] / 2MIN / 5MIN / 10MIN / 30MIN / 60MIN
Allows you to select the shooting interval for interval
shooting. (
墌
pg. 21)
VIDEO
[ ] = Factory-preset
SOUND MODE and NARRATION
During tape playback, the camcorder detects the sound
mode in which the recording was made, and plays the
sound back. Select the type of sound to accompany your
playback picture. According to the menu access
explanation on page 27, select “SOUND MODE” or
“NARRATION” from the Menu Screen and set it to the
desired parameter.
[STEREO ] : Sound is output on both “L” and “R”
channels in stereo.
SOUND L : Sound from the “L” channel is output.
SOUND R : Sound from the “R” channel is output.
[OFF] : Original sound is output on both “L” and “R”
channels in stereo.
ON : Dubbed sound is output on both “L” and “R”
channels in stereo. (
墌
pg. 40)
MIX : Original and dubbed sounds are combined and
output in stereo on both “L” and “R” channels.
墌
pg. 44, “For More Accurate Editing”
Allows you to set the video recording mode (SP or LP)
depending on your preference. It is recommended you
use “REC MODE” in VIDEO Menu when using this
camcorder as a recorder during dubbing. (
墌
pg. 37, 38)
[OFF] : When the SNAPSHOT button is pressed during
tape playback, the playback image pauses and normal
playback will resume after approximately 6 seconds.
(The still image is not recorded.)
ON : Enables dubbing of images recorded on a tape to a
memory card. (
墌
pg. 24)
IMAGE SEL. / TAPE SEL. / ALL / RETURN
墌
pg. 36, “To delete thumbnail images”
墌
pg. 18, “Blank Search”
[OFF] : Disables audio/video signal input from the AV
connector. (
墌
pg. 37)
A/V.IN : Enables audio/video signal input from the AV
connector. (
墌
pg. 37)
S.IN : Enables audio/S-video signal input from the AV
connector. (
墌
pg. 37)
TIME CODE
AUX MIC
CLOCK ADJ.
QUALITY
IMAGE SIZE
REC SELECT
INT.SHOT
INT.TIME
Playback Menus
SOUND MODE
NARRATION
SYNCHRO
REC MODE [SP] / LP
COPY (GR-DX97/77/67 only)
NAVI.DEL. (GR-DX97/77/67 only)
BLANK SRCH
S/AV INPUT (GR-DX97/77/57/37 only)
GR-DX97PAL.book Page 30 Tuesday, January 6, 2004 12:44 PM