JVC GR-DVM90U, Service Manual

Page: 26 / 105

2-9
Fig. 2-2-16
5. Guide roller (SUPPLY) assembly/ Rail assembly
Note 5a:
Pay careful attention to the spring not to lose it.
Note 5b:
Pay careful attention to the engagement of the rail assembly’s
arm ends because they easily come off the engagement.
Moreover, make sure that there is neither deformation nor
damage observed in them.
Note 5c:
When removing the rail assembly, check to see if the collar is
securely set in the arm groove.
Fig. 2-2-17
6.
B
Slide deck assembly/
C
Main deck assembly
Note 6a:
When removing the slide deck assembly, pay heed to the three
components of the following because they are apt to come off
after the slide deck assembly is removed.
Tension lever assembly/ Slide lever assembly
Brake control lever assembly
For reassembling those components, refer to Fig. 2-2-19 on
page 2-10.
Note 6b:
When reassembling the slide deck assembly to the main deck
assembly, combine them with each other by the side grooves
and then slide the slide deck assembly by 1 mm or so.
5b
(W5a)
(W5a)
(W5a)
(W5b)
(P5)
Note 5a
Note 5b
Note 5c
5a
C Main deck
assembly
B Slide deck assembly
(L6a)
(L6b)
(L6d)
(L6c)
Note 6b
Note 6a
(W6)
1mm
5a 5b
8a
8c
8b