JVC GR-DVM90U, Service Manual

Page: 13 / 105

1-9
7
6
EYE CUP
GUIDE(VF)
CASE/CAP
2
CAP
(VF)
1
3
4
5
HOLDER
(LCD)
LCD MODULE
B/L SUB ASSY
FRAME(VF)
FFC
EYE PIECE
SUB ASSY
NOTE e 5
(L b)
5
a
(L a) 5
NOTE f
5
NOTE d
5
1.5 DISASSEMBLY OF 0 E VF ASSEMBLY
1.5.1 0 E VF assembly
Note 5 a: When disassembling the E VF assembly, remove
the frame (VF) from the case assembly depending
on the situation.
Note 5 b: Be very careful not to get the inside of the VF soiled
or dusty during and after disassembling the E VF
assembly.
Note 5 c: After the screw having the loose-proof tip was once
removed from the E VF assembly, don’t reuse it.
1. Remove the eyecup and pull out the guide (VF).
2. Draw the frame (VF) out of the case assembly.
<Case assembly>
3. Remove the screw (1) first and then lever (VF).
4. Remove the three screws (2-4) and draw out the eyepiece
Fig. 1-5-1
sub assembly.
<Frame (VF)>
5. Remove the screw (5) first and then LCD module/holder
(LCD).
Note 5 d:
Pay heed to the FFC not to damage it during the
removing work.
6. Get the two hooks (L 5 a, L 5 b) disengaged and then
remove the holder (LCD).
Note 5 e: Carefully proceed with the above-mentioned work
not to damage any part.
7. Disconnect the connector (a) and remove the LCD module.
Note 5 f: Pay heed the parts not to damage any thing.
✽
: 0.069N·m (0.7kgf·cm)
✽✽
: 0.098N·m (1.0kgf·cm)