EN
33
EN
G
L
ISH
* The camcorder turns off automatically. Re-check if the indication clears. When it does, you can resume
using the camcorder. If the indication remains, consult your nearest JVC dealer.
Warning Indication
Meaning / Remedy
●
Displays the battery remaining power.
●
As the battery power comes close to nil, the battery remaining power
indicator blinks. When the battery power is exhausted, power turns
off automatically.
SET TO MANUAL MODE
●
Appears when you attempt to change “Menu Settings”, “Backlight
Compensation” or “Manual Focus” while in AUTO mode
A
(
墌
15).
TAPE END
●
Appears when the tape ends during recording or playback.
LENS CAP
●
Appears for 5 seconds after power is turned on if the lens cap is
attached or when it is dark.
SET DATE/TIME!
●
Appears when the date/time is not set (
墌
12).
●
The built-in clock battery has run out and the previously set date/time
has been erased. Consult your nearest JVC dealer for replacement.
●
Appears if a tape is loaded while the Power Switch is set to
“REC”
.
●
Blinks when no tape is loaded.
CHECK TAPE’S ERASE
PROTECTION TAB
●
Appears when the erase protection tab is set to “SAVE” while the
Power Switch is set to
“REC”
.
UNIT IN SAFEGUARD
MODE REMOVE AND
REATTACH BATTERY
OR DC PLUG
●
Error indications (01, 02 or 06).
Remedy: Remove and reattach the power supply or battery*.
UNIT IN SAFEGUARD
MODE EJECT AND
REINSERT TAPE
●
Error indications 03 or 04.
Remedy: Eject the cassette and re-insert*.
High
Exhausted
Troubleshooting
GR-D850AA_EN.book Page 33 Thursday, October 18, 2007 5:26 PM
