99
First Time Installation
When you turn on the power and the monitor, “First Time Installation” appears.
Start setting referring to the menu configuration.
For the setting items, see the pages below.
t
“Language”
+
“Language” on page 17
t
“No Sync Action”
+
“Sync Function” on page 15
t
“No Operation Action”
+
“No Operation Action” on page 15
Setting procedure
1
Press to move the cursor to the setting item
2
Press to select the setting values
l
Each time you press one of these buttons, the setting value changes.
3
Move the cursor to “Set”
4
Press to finish setting
l
When you change the settings, a confirmation message appears.
Operate according to directions.
The operation procedure
1
Press the MENU button to display the Main Menu
To display the Main Menu
Ô
Press the MENU button.
To display the Set-Up Menu
Ô
Press the button while holding the button.
2
Use the buttons to select an item and press the button to
proceed to the next screen
l
For some items, pressing the buttons adjusts the setting.
3
Use the buttons to select an item and use the buttons
to adjust the setting
4
Press the MENU button to finish operations
l
Press the MENU button repeatedly until the menu screen disappears.
Main Menu
Selected item
Operation guide
Set-Up Menu
Ex.: When “Picture Function” in
the Main Menu is selected
Menu Configuration
The menu screen disappears automatically if no operations are
made for about 30 seconds.
Inoperable menus will be grayed out.
Some items will not be displayed on the menu depending on the
selected input and signal format.
“Closed Caption” is available for North America only.
<
First Time Installation
>
: English
: Off
: Off
Language
No Sync Action
No Operation Action
Set
< Main Menu >
Picture Function
▶
Size/Position Adjust
▶
Aspect
▶
Zebra
▶
Signal Setting
▶
Marker
▶
Audio Setting
▶
Scope Setting
▶
Sync Function
▶
No Operation Action :
Off
Closed Caption
▶
< Set-Up Menu >
Function Setting
▶
Picture Sub Adjust
▶
White Balance Setting
▶
Remote Setting
▶
Information
▶
Control Lock
:
Off
Language
: English
SDI Format
:
Auto
IMD
▶
all reset
< Picture Function >
Backlight
:
-02
Aperture
:
Off
Aperture Level
:
07
CTI
:
Normal
LTI
:
Hard
Gamma
:
2.2
Color Temperature
:
6500K
Picture Memory
▶
sub menu
reset
< Main Menu >
Picture Function
▶
Size/Position Adjust
▶
Aspect
▶
Zebra
▶
Signal Setting
▶
Marker
▶
Audio Setting
▶
Scope Setting
▶
Sync Function
▶
No Operation Action :
Off
Closed Caption
▶
Once the settings have been adjusted, this screen will not appear
again.
The settings can be changed afterwards in Main Menu and Set-Up
Menu.
'79*B(1LQGE
