44
Installation
l
How to set up 1
You can tilt the monitor as follows.
When the monitor is not tilted (0°),
the guidelines align as illustrated
below.
Guidelines
Stand
Monitor
Approx. 6°
0°
Approx. 6°
The illustration of the
monitor is of DT-V21G2.
l
Be careful not to pinch your fingers in the gap between the
monitor and the stand.
l
How to set up 2
You can place the monitor as illustrated below.
1
Remove the screws on the sides of the stand (see the following
illustration), and lift up the stand.
Screw (silver)
Approx.
141°
*
1
*
1
Approx. 148° for DT-V24G2.
2
Attach the removed screws and place the monitor as illustrated
below.
The illustration of the
monitor is of DT-V21G2.
l
To place the monitor as shown in “How to set up 1” again, remove
the screws on the sides of the stand, align the guidelines, and then
reattach the screws.
CAUTION
l
When lifting up the stand...
- Lay the monitor on a cloth with the LCD panel facing down to
prevent the LCD panel from being damaged.
- Be careful not to pinch your fingers in the moving parts.
l
Make sure to lift the stand up so that the monitor will be
vertical; otherwise the monitor may fall over.
l
Place the monitor on a mat to avoid scratching the table
surface.
l
Do not rest your arm on the monitor or lean against the monitor.
l
Do not touch the LCD panel when installing the monitor.
l
Be sure to install the monitor securely to prevent the monitor from falling over, which may cause damage to the monitor or injury.
l
To detach the stand
Lay the monitor on a cloth with the LCD panel facing down to
prevent the LCD panel from being damaged.
Attachment screws
Screw holes for stand
attachment
Stand body
Monitor
The illustration of the
monitor is of DT-V21G2.
l
To install the stand
When attaching the stand to the monitor, insert the guides of
the stand plate into the guide holes on the monitor to place the
stand in the correct position. Then fix the stand firmly with the
attachment screws.
Monitor
Screw holes for
stand attachment
Guides
Guide holes
Stand plate
Stand body
The illustration of the
monitor is of DT-V21G2.
'79*B(1LQGE
