JVA ELECTRIC FENCE SYSTEMS
10
Description
4.13 Low Power mode
Z114 energizers can be switched into Low Power mode. Low Power mode may be
used in situations where the fence is not required to be a deterrent but is still required
to actively detect intrusion. In Low Power mode the fence live wires operate at a
much lower voltage, typically 500V peak. See Section 8.1.1 for details on using the
keypad to set Low Voltage mode.
4.14 Group Simultaneous Pulse Feature
In some installations it may be preferable to provide the ability to link multiple units
into a group. When linked, the individual Z series energizers become a Group.
As many as fifteen energizers can be grouped. Individual units in a Group have
simultaneous high voltage output pulses and act as if they are one energizer with
multiple outputs. This is designed so that no possible combination of individual
outputs can be dangerous.
4.15 Remote Control Unit (Optional)
The Remote Control Unit provides the Z114 with the ability to arm or disarm the
energizer via a compact key chain fob remote control. If using the remote control the
siren can be used to acknowledge arming with 1 beep and disarm with 2 beeps, see
programming option 7.6.13.
The remote controls have a range of up to 100 metres.
They come fitted with a LR27A 12V battery that will provide up to 2 years service.
4.16 Cabling
High Voltage Cabling (Fence Feed and Returns) should be run using suitably rated
cable. Double insulated electric fence “underground” cable is suitable. High Voltage
Cables must never be run within the same conduit as Low Voltage Cables. A minimum
distance of 30mm should be kept between High Voltage and Low Voltages Cables.
To maintain the IPx4 rating of the enclosure and to ensure moisture does not enter
the enclosure via the cable entry area a silicon sealant (neutral cure) must be used
to seal all the cable passages.
4.17 Lightning Protection
Although the Z114 contains internal lightning protection elements, external light-
ning protection elements such as additional external lightning protection kits are
recommended to further reduce lightning damage and thus reduce repair costs.
They are available from your local dealer.
