33
5 Maintenance
5 Maintenance
Your Z6 has the following integrated maintenance programmes:
U
Rinsing the machine
U
Rinsing the milk system in the dual spout
U
Cleaning the milk system in the dual spout (
‘Clean the milk
system’
)
U
Changing the filter (
‘Change the filter’
) (only if filter is fitted)
U
Cleaning the machine (
‘Clean’
)
U
Descaling the machine (
‘Descale’
)
E
Clean or descale the machine, rinse the milk system or change
the filter when you are prompted to do so.
E
In the interests of hygiene, you should clean the milk system
daily
when you have been preparing milk.
You can initiate the rinse operation manually at any time.
Precondition:
The start screen is displayed.
T
Place a receptacle under the dual spout.
T
Press the Rotary Switch.
‘Maintenance status’
T
Press the Rotary Switch again.
‘Clean’
T
Turn the Rotary Switch until
‘Rinse’
is displayed.
T
Press the Rotary Switch to initiate the rinse operation.
‘Machine is rinsing’
,
‘Milk system is being rinsed’
, water
flows out of the dual spout.
The rinse stops automatically. The start screen is displayed.
15 minutes
after milk preparation, the milk system is
automatically
rinsed. Therefore always place a receptacle under the dual spout
after preparing milk.
Rinsing the machine
Automatic milk system
rinsing
Summary of Contents for Z6
Page 1: ...Z6 Instructions for Use PROFESSI O N A L A R O M A G R I N D E R ...
Page 50: ...50 ...
Page 51: ...51 ...
