Jura Z6, Instructions For Use Manual

Page: 22 / 52

22
3 Daily operation
T Rinse the water tank with clean water.
T Clean the milk system in the dual spout (see Chapter 5
‘Maintenance – Cleaning the milk system’).
T
Remove the milk pipe and rinse it thoroughly under running
water.
T
Dismantle and rinse the dual spout (see Chapter 5 ‘Mainte-
nance – Dismantling and rinsing the dual spout’).
T Wipe the surface of the machine with a clean, soft, damp
cloth (e.g. microfibre cloth).
You will find more information about caring for your Z6 in program-
ming mode under
‘Maintenance status’ / ‘Maintenance informa-
tion’ .
Carry out the following maintenance actions regularly or as
required:
U
In the interests of hygiene, we recommend changing the milk
pipe and interchangeable milk spout on a regular basis
(approximately every 3 months). Replacements are available
from specialised dealers. Your Z6 is equipped with the
HP3
milk system.
U
Clean the inside of the water tank, e.g. with a brush. Further
information about the water tank is provided in these instruc-
tions for use (see Chapter 5 ‘Maintenance – Descaling the
water tank’).
U
Traces of milk and coffee may stick to the top and bottom of
the cup grille. If this happens, clean the cup grille.
When the Z6 is switched off, the system is automatically rinsed if a
speciality coffee has been prepared.
T Place a receptacle under the dual spout.
T Press the On/Off button Q .
E If milk has been prepared, you will be prompted to clean the
milk system (
‘Clean the milk system’ ). After 10 seconds the
switch-off process continues automatically.
‘Machine is rinsing’ , the system rinses itself. The operation
stops automatically. Your Z6 is switched off.
Regular maintenance
Switching off the
machine