30
4 Permanent settings in programming mode
T
Press the Rotary Switch to enter the programme item.
‘Units’
T
Turn the Rotary Switch until
‘oz’
is displayed.
T
Press the
‘Save’
button.
‘Saved’
appears briefly on the display.
‘Units’
T
Press the
‘
’
button until the start screen is displayed again.
In the programme item
‘Machine settings’
/
‘Factory setting’
the
machine can be reset to its factory setting: This resets
all user set-
tings
to the factory setting. Your Z6 then switches off.
Precondition:
The start screen is displayed.
T
Press the Rotary Switch.
‘Maintenance status’
T
Turn the Rotary Switch until
‘Machine settings’
is displayed.
T
Press the Rotary Switch.
‘Choose language’
T
Turn the Rotary Switch until
‘Factory setting’
is displayed.
T
Press the Rotary Switch to enter the programme item.
‘Factory setting’
/
‘Reset the machine to the factory set-
tings?’
T
Press the
‘Yes’
button.
‘Saved’
appears briefly on the display.
Your Z6 is switched off.
In the programme item
‘Machine settings’
/
‘Water tank illumina-
tion’
you can change the setting for water tank illumination:
U
‘Permanent’
: The water tank is always illuminated.
U
‘Temporary’
: The water tank is only illuminated when an
action is being performed by the machine.
Example:
Proceed as follows to change the water tank illumination
setting from
‘Permanent’
to
‘Temporary’
.
Precondition:
The start screen is displayed.
T
Press the Rotary Switch.
‘Maintenance status’
T
Turn the Rotary Switch until
‘Machine settings’
is displayed.
Restore factory settings
Water tank illumination
Summary of Contents for Z6
Page 1: ...Z6 Instructions for Use PROFESSI O N A L A R O M A G R I N D E R ...
Page 50: ...50 ...
Page 51: ...51 ...