Jura Z6, Instructions For Use Manual

Page: 19 / 52

19
2 Preparation
T Fit the filler funnel for ground coffee.
T Place one level measuring spoon of ground coffee into the
filler funnel.
T
Remove the filler funnel and close the cover of the powder
chute.
The start screen is displayed.
T Press the ‘Espresso’ button.
Preparation starts. ‘Espresso’ , the preset amount of water for
coffee flows into the cup.
Preparation stops automatically. Your Z6 is once more ready
for use.
You can adjust the grinder to suit the degree of roast of your coffee.
If you adjust the consistency of grind when the grinder is not oper-
ating, the grinder adjustment switch could be damaged.
T Only adjust the consistency of grind when the grinder is run-
ning.
The consistency of grind is correct if the coffee flows regularly from
the coffee spout. In addition a fine, thick crema forms.
Example: Proceed as follows to change the consistency of grind
during the preparation of an espresso.
Precondition: The start screen is displayed.
T Place a cup under the dual spout.
T Open the cover of the grinder adjustment switch.
T Press the ‘Espresso’ button to start preparation.
T Turn the grinder adjustment switch to the desired position
while the grinder is running.
The preset amount of water flows into the cup. Preparation
stops automatically.
T
Close the cover of the grinder adjustment switch.
Adjusting the grinder
CAUTION