Jura Z6, Instructions For Use Manual

Page: 29 / 52

29
4 Permanent settings in programming mode
T Press the Rotary Switch to enter the programme item.
‘Water hardness’
T Turn the Rotary Switch to change the setting.
T
Press the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Water hardness’
T Press the ‘

’ button until the start screen is displayed again.
In the programme item ‘Machine settings’ / ‘Display’ you can set the
display brightness (as a percentage).
Precondition: The start screen is displayed.
T Press the Rotary Switch.
‘Maintenance status’
T Turn the Rotary Switch until ‘Machine settings’ is displayed.
T Press the Rotary Switch.
‘Choose language’
T Turn the Rotary Switch until ‘Display’ is displayed.
T Press the Rotary Switch to enter the programme item.
‘Display’
T Turn the Rotary Switch to change the setting.
T Press the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Display’
T
Press the ‘

’ button until the start screen is displayed again.
In the programme item ‘Machine settings’ / ‘Units’ you can select
the unit used for the amount of water.
Example:
Proceed as follows to change the unit for the amount of
water from ‘ml’ to ‘oz’ .
Precondition: The start screen is displayed.
T Press the Rotary Switch.
‘Maintenance status’
T Turn the Rotary Switch until ‘Machine settings’ is displayed.
T Press the Rotary Switch.
‘Choose language’
T Turn the Rotary Switch until ‘Units’ is displayed.
Display brightness
Unit for amount of water