7
2.4 Fill coffee beans
To ensure that your machine will work perfectly for a long
time and to avoid damage, please note that the grinding gear
of your Jura coffee machine is not suitable for coffee beans
which were treated, during or after roasting, with additives
(e.g. sugar). Such coffee blends may damage the grinding
gear. Any repair costs resulting from the use of such blends
are not covered by warranty.
Open the bean tank cover (12) and remove the aroma preser-
vation cover (13).
Remove any dirt or foreign matter from the bean tank.
Fill coffee beans in the bean tank and close the cover.
2.5 Adjusting the grinding gear
You can adjust the grinding gear to the roast of your coffee. We
recommend
a fine grinding degree
for bright roasts (the smaller the dots,
the finer the grinding)
a coarse degree
for dark roasts (the larger the dots, the
coarser the grinding)
The grinding degree may only be adjusted while the grinding
gear is running.
Open the bean tank cover (12) and remove the aroma preser-
vation cover (13).
To adjust the grinding degree, turn the rotary switch (Fig. 2) to
the required position.
3. First use
Fill coffee beans in the bean tank (12).
Switch on the IMPRESSA F50/F5 using the ON/OFF key
(3).
SPRACHE
DEUTSCH
The illuminated ring (2) is active.
Turn the rotary switch (1) until the required language is dis-
played.
For example
LANGUAGE
ENGLISH
Confirm your selection by pressing the rotary switch (1).
FILL
WATER
Fill the water tank (10) with fresh water.
OPEN TAP
Place an empty cup under the replaceable hot water nozzle (16).
Open the steam / hot water draw-off tap (14) (Fig. 13).
FILLING
SYSTEM
CLOSE TAP
Close the steam / hot water draw-off tap (14).
HEATING
PRESS
MAINT.
Press the maintenance key
(7).
Machine carries out a rinsing operation.
RINSING
READY
If BEANS FILL is displayed, press the coffee draw-off key
again. Machine not filled with coffee beans yet.
To get an excellent froth, adjust the coffee spout (17) to the
size of your cup (Fig. 3).
E
