background image

13

13. Drawing off steam with the Profi-Auto-
Cappuccino/Caffè Latte (optional)

The Profi-Auto-Cappuccino/Caffè Latte is optionally avail-
able. Contact your authorized dealer. 

13.1 Connecting the Profi-Auto-Cappuccino/
Caffè Latte to the IMPRESSA F50/F5

Disassemble the replaceable hot water nozzle (Fig. 5) or the
replaceable steam/frothing nozzle (Fig. 6).

Mount the Profi- Auto-Cappuccino/Caffè Latte (Fig. 7)

Press one side of the hose into the opening behind the dial
(Fig. 10)

The optionally available milk container can be used for
sucking in milk. How to connect it see Fig. 8.

13.2 Drawing off cappuccino and hot milk 
with Profi-Auto-Cappuccino/Caffè Latte

Fill the milk container with milk or immerse the hose in the milk
directly.

Place a cup under the Profi Auto-Cappuccino/Caffè Latte
(Fig. 8)

Press the steam pre-selection key 

(8).

HEATING UP

STEAM
READY

To draw off steam open the steam/hot water draw-off tap (14)
(Fig. 13).

The illuminated ring (2) is active.

You can adjust the steam draw-off time individually by turning
the rotary switch (1) until the required SEC are displayed.

For example, 

35 SEC

If you do not change the steam draw-off time settings using the
rotary switch (1), the machine will use the settings last adjusted

For cappuccino turn the selector switch (1) (Fig. 9) to area
(2).

For hot milk turn the selector switch (1) (Fig. 9) to area (3).

To increase the heat turn the selector switch (1) (Fig. 9)
to area (+). To reduce the heat, turn the selector switch to
area (–).

Now place the cup with the cappuccino froth or the hot milk
under the coffee spout and draw of the product of your choice.

13.3 Cleaning the Profi-Auto-Cappuccino/
Caffè Latte

The Profi-Auto-Cappuccino/Caffè Latte must be cleaned
after each draw-off operation. 

Fill water in a container and immerse the hose in it. 

Draw off steam until the water/steam mixture is clean. 

If necessary, disassemble the Profi-Auto-Cappuccino/Caffè Latte
and thoroughly rinse the flow regulator with water (Fig. 16 and
Fig. 17)

For proper cleaning, use the Jura Auto Cappuccino Cleaning
Agent This is available at your authorized dealer. Daily
cleaning is recommended.

E

Summary of Contents for IMPRESSA F5

























Reviews: